Forum Replies Created

Page 22 of 27
  • Bryan

    Member
    January 29, 2014 at 2:26 pm in reply to: Conversion manufacturers comparison

    Actually, if we want to put a realistic spin on this, Millennium would be a good place for support of Vantare coaches because I believe Nelson was a part of the Vantare team at one time and his company is certainly capable of every facet of support.

  • Bryan

    Member
    January 28, 2014 at 9:06 pm in reply to: AITA does good again and still

    And, when you apply for the card, Al arranges to have your coach washed free of charge.

  • Bryan

    Member
    January 28, 2014 at 8:05 pm in reply to: Jun air, just checking

    I thought using an oil filled compressor was verboten for the aux system. Perhaps with a filter system like that it’s OK? Does anyone else have an aux compressor that is not oilless?

    Based on documentation I received I believe my bus originally had a JunAir model 6 but it was long gone by the time I got it. I’ve been planning to replace it with an oil free compressor based on advice here. The noise would certainly be lessened if an oil filled unit could be used, though.

  • Bryan

    Member
    January 28, 2014 at 8:04 pm in reply to: New 50DN Alternator

    Thanks Joe,

    I feel better now,,, my back was beginning to ache just thinking about leaning over the access portal to replace that alternator. I sure hope it lasts for that many miles,,,, we only have 155,000 right now.

  • Bryan

    Member
    January 27, 2014 at 1:55 pm in reply to: Grey water air

    I found one in the country in Grand Rapids Michigan, they are shipping it to me. Buchanan will make one but they are quoting a 6 week lead time.

  • Bryan

    Member
    January 7, 2014 at 8:33 pm in reply to: Changing Coolant

    Well, I bought the coolant and distilled water and ordered the blank coolant filter since the coolant is already pre-charged. Just waiting for a break in the weather to get it done.

    It turns out Old World Industries makes Powercool for DD. They sell it as FleetCharge and NAPA resells the same coolant under their name ($14/gal with the Napa card). According to the manufacturer as long as one maintains the SCAs and pH, and avoids contaminations the coolant fill is good for life.

  • Bryan

    Member
    December 24, 2013 at 2:03 pm in reply to: Turn Signal light upgrade

    I replaced the faded lenses on my incandescent lights a year ago (’99 XLV) which updated the look of the bus considerably. If I remember correctly the 2 bulbs in each light were hard wired. I did not see a connector outside the bus skin. I guess one would have to solder in the new LED lights. Doable but no plug and play. Did anyone upgrade the old incandescent lights?

  • Bryan

    Member
    November 29, 2013 at 9:27 am in reply to: Where are we ?

    I thought that was your toad by your driveway….I guess I got that wrong….

  • Bryan

    Member
    November 25, 2013 at 12:20 am in reply to: PC Spring Rally

    Yep… we’ll be there…. can’t wait !!

  • Bryan

    Member
    November 20, 2013 at 7:47 am in reply to: New norgrens

    Jon

    Thanks I do agree that a regular maintance is need for these coaches. They are homes on wheels they roll twist and turn and nothing last for ever. I will posrt when I am ready to take that job on.

    I do have body stands, jacks as well as a 12 to one torque multiplier to get the job done just need the time, I don’t know how I was able to go to work before I retired.

  • Bryan

    Member
    November 13, 2013 at 2:11 pm in reply to: Radiator fan

    Greg,

    This is strictly a guess, but is it possible to take yours off and visit a junk yard for trucks? The bolt pattern and outside diameter would likely be the critical concerns. If the number of blades and pitch of the blades was different and it affected cooling I would start playing with pulley diameters to get more RPMs if that happened.

  • Bryan

    Member
    November 11, 2013 at 5:37 pm in reply to: PC Spring Rally

    Hot damn Patti and I will be there if I hafta walk ! Looking forward to meeting everybody and especially looking forward to the seminars as I know nothing about everything, well maybe I know a little bit.

  • Bryan

    Member
    November 11, 2013 at 8:03 am in reply to: Hilton Head Island

    Too bad. Catch you next time!

  • Bryan

    Member
    November 10, 2013 at 8:05 am in reply to: Whats the best way to get behind the generator

    Whoa………….since when did answers have to be accurate?

  • Bryan

    Member
    November 9, 2013 at 9:25 pm in reply to: subscribing to thread

    Dean,

    Don’t understand your question “subscribe” to a thread.

Page 22 of 27