Bryan
Forum Replies Created
-
I think there are many benefits to the Koni shocks, especially on the front axle. Koni has 5 adjustment positions you can choose from. As they come out of the box…. Factory set at soft position. With the aid of my ramps I tried each position and road tested. After this I went back to soft setting and really like that ride.
If you say firmer ride I agree. Judging the overall performance of the Koni I’ll agree somewhat with Prevost comments. Keeping in mind the front ends of our buses are heavy weights. I think we need a better shock in this position to help save the front end parts. Also, keep tires from rippling the outside edges of the tires.
When I traveled with the Prevost OEM shocks I had more movement up and down. Koni seems to reduce the continued travel limiting to one single flex set at the soft position.
AL
-
Tipping the diff takes time to get to bearings next pack bearings with grease or pre lube bearings and fill hubs
-
We use 191 every winter to get to AZ for warmer weather. Our route going south is I70 west to US191 to US160 to US 89 to Flagstaff AZ. There are no hard uphill pulls or really steep downhills on this route. Speed limit is 65 most all the way. We do not use US 163 north of Kayenta because of the slow up and down at Mexican Hat to cross the bridge over the San Juan river. We reverse the same route going north. Fuel at Pilot east of Kingmon AZ. Not much place to fuel a bus on US 191. Only rest area is 10 miles south of Moab. The views are great.
-
That’s beautiful !! Good job !! Be sure to post some after pictures when finished !!
Diane
-
I was told not to ever idle for more than a few minutes on low idle. I asked Prevost about it just 2 weeks ago, they said you could idle all day long with the bus air going on HIGH idle, to keep the oil pressure up, and the turbo spinning at a higher rate. The only thing it hurts is your pocket book for the fuel. I don’t worry about that, I’d rather be cool.
Bryan, where is that crankcase filter located? Mine will puff after its hot, but not when it’s cold. No oil consumption.
-
Paul, I had that issue with smoke puffing from the breather tube and found that changing the filter on the crankcase breather did the trick. The filter looks sorta like a brillo pad, and I think it that if it gets oily, smoke will start to puff out the bottom of the tube when the engine gets hot and heats up the filter. On mine it is really hard to get at so I had MCI change it during my last oil change.
As to the idle, like others I will let it run on high idle if stopping for 10 mins. or less, but otherwise shut down. Always use high idle. There is a reason they gave us that switch, and you will see that the oil pressure is higher on high idle, which should be better all around.
Long idle times on high idle are common on tour busses, which need to idle to keep the A/C running. While probably not too harmful, it’s also not helpful and does use a lot of fuel. The MCI conversion shells share more DNA with their tour bus cousins than do Prevosts, and mine retains the driver monitor system which records and nags about such things as idle time, hard braking incidents, time driven off cruise control, ect. Idle time is the first item on the menu, so I assume fleet operators find it most important — probably for the fuel use issue alone.
-
Aha,
Sounds like Okie is also coming around to my way of thinking. If your flip phone doesn’t take pictures, send pictures, receive pictures, send or receive text and has no voice mail (answering machine) capability you never have to deal with the phone company.
Keep it up guys. You’re slowly but surely realizing progress isn’t.
-
“ I know of one test drive in which the buyer asked about the constantly cycling air system gauges. The seller’s response was that is normal, they all do that.
One of the many lies that were told to me by a unscrupulous salesman at a reputable dealer.
Others were…
“We do full service on all of our trade ins. Oil, transmission fluid, generator, everything.”
“We inspect everything and if something needs to be replaced, we replace it.”
“Everybody levels these coaches by letting all the air out.”
“IF these tires were not nearly new we would not let you drive off the parking lot.”
And the list goes on and on.
As a newbie that had lived and traveled in fifth wheels for years and knew next to nothing about buses, he lied about things that he did not even have to lie about. He was the ultimate “slick” salesman.
Thankfully I was buying a bus in pretty good shape in spite of the salesman and in no small part due to a God that watches out after children and fools.
The only records I had were receipts and notes left in the filing system by the two previous owners including much if not all the correspondence during the shopping and conversion phase. Although nothing was recent those records have been very helpful.
I have said before and I will say it again, If I knew in advance half the stuff I have learned on this site about the pitfalls of buying a bus I would have ran as fast as I could the other way.
Sometimes ignorance really is bliss because we love our home on wheels. Although this is not by any means an endorsement of buying a coach without records or knowledge. I would Not do it the way I did it again.
Davy
-
The fan will not work if the Generator is not producing AC power. The fan feeds directly off the main breaker inside the control box.
I had the same problem. My voltage regulator quit, which caused no AC power produced, which caused the fan to stop, then overheat, and shutdown.
Start it cool, and check voltage, if no voltatge, that’s your problem.
-
I recently bought 4 of the exact fittings in Tom’s photo from Amazon.
Seems Angola used the Thetford fittings as well.
-
Where is the hot water heater?
-
Bryan
MemberMay 15, 2014 at 8:48 am in reply to: Advice 23 Foot Original Style Manual Zipdee AwningThanks for the responses. I think for me the original manual
ZipDee would be best. I was getting ready to stimulate the economy and then Jon’s
good solid advice about keeping what I have may result in another 6 months of low
GNP expansion.Ken
-
I have they schematics. The mx and parts manuals came w/the coach.
What is this? I’ve provided near and far pics

-
I am sure Jon would agree, it is about a two or three day project to complete. But the end results are well worth the effort.
Getting in there to the goodies is about the hardest part of it all. I used automotive engine paint (heat sensitive) and it has been on there a good while.
<>DS<>
-
Hish, at 13.5V (assuming no or minimal loads) I think you’re pretty close to where you want to be. My coach measures 13.8V which is probably the best setting for our dumb voltage regulator 50DN power sources. I think Gil is correct with his VR settings recommendations.