Forum Replies Created

Page 49 of 2304
  • Archived

    Member
    September 3, 2021 at 7:44 am in reply to: cruise air service

    Great info Jeff. Mike

  • Archived

    Member
    September 2, 2021 at 12:43 pm in reply to: Stranded in Wisconsin

    Thanks Dick,

    I actually considered contacting you for some driving tips after we picked up the coach before I hit the road (or anything else) but we were worried about finding some place to stay after we picked it up so I just jumped into the deep end and so far the floaties are working. Thanks for the suggestions but I think we lucked out. They’ve had a couple of cancellations at this park so we’re good till after the labor day weekend. I thinking after that we probably won’t have any problems finding another site as we head back to the smoke filled skies of the great north west. This is actually a really nice campground. Nice wide roads lots of deep sites with 50 amp service. Found it in the Big Rigs Best Bets book so so far they’re 1 for 1 with us.

  • Archived

    Member
    September 2, 2021 at 1:04 am in reply to: Stranded in Wisconsin

    Crisis averted.

    Spoke to Marathon 24 Hr. support and spoke to chap named Terry. Really helpful guy.

    Walked me through the “Jump Start” switch but after pushing the switch and spending some time on the phone there was no life on the dash. I was headed to the rear of the coach with a VOM to check the chassis batteries and I mentioned it was an H345. After hearing that he had me go back to the cockpit and look for a toggle switch on the dash with a symbol that looks like a switch on a wiring schematic. If that switch is off it kills power to the dash (I guess to prevent battery drain). Once I threw that switch the entire dash came alive and I breathed a sigh of relief because I could finally have happy hour. ;^)

    Thanks for all the quick responses folks, much appreciated.
    Here’s a pic of what that switch looks like. If it’s in the on position (red light illuminated) dash is live. Off position = no dash lights or engine start.
  • Archived

    Member
    September 1, 2021 at 7:02 pm in reply to: $9200 for a 20KVA Kohler rebuild

    I am not saying starting a generator with a load on it is good but most Kohlers with Yanmar engines have a breaker in the control panel so if started with over amperage the breaker will trip.

    If you have to much load on start up it also has a safety to were it will not put out AC until reduced.

    That’s out of a Kohler manual.

    If I was purchasing a used coach I would want to see records of service for my generator which is as important as PDI on the bus.

    To often there are issues and a hour meter was changed out to try and sell a bus.

    Later

    bv

  • Archived

    Member
    September 1, 2021 at 3:48 pm in reply to: $9200 for a 20KVA Kohler rebuild

    Good point Mr. Calif.

    If this turns out to be another soot build up in generator and exhaust we have coached many owners on that fix.

    AL

  • Archived

    Member
    September 1, 2021 at 9:12 am in reply to: $9200 for a 20KVA Kohler rebuild

    I’d highly recommend Martin Diesel in Defiance, Ohio. They were the builder of our generator for Marathon. At about 5000 hours we had a leaking main oil seal, requiring removal. They were great and very reasonable.

  • Archived

    Member
    August 30, 2021 at 2:58 pm in reply to: Advice on TV service

    You just need to make up your mind on which team is your team. Go Dawgs, beat Clemson.

    Chuck 48

  • Archived

    Member
    August 30, 2021 at 10:39 am in reply to: Engine Oil Residue in Air System

    Thanks

  • Archived

    Member
    August 28, 2021 at 9:54 pm in reply to: Hydraulic or air jack recommendations

    Here is what I have to work under the Bus:

    Qty (6) of these for supporting the 4 body support points, and 2 for the drive axle.

    https://www.amazon.com/gp/product/B0093NBS9W/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1

    Qty (1) of these for lifting the body, drive, and Steer axles

    https://www.harborfreight.com/20-ton-air-over-hydraulic-jack-95553.html?_br_psugg_q=air+hydraulic+jack

    Qty (1) of these for lifting the Tag axle and anywhere I need a low height jack.

    https://www.amazon.com/gp/product/B00028G2F2/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1

    To support the Tag axle I cut 2 pcs of 4″ x 8″ cut to 11″ long steel rectangular tubing and stand it on end.

    To support the steer axle I use these:

    https://www.oreillyauto.com/detail/c/power-torque-tools/tools—equipment/shop-equipment/lift-equipment/jack-stand/a656e1139b8f/power-torque-tools-6-ton-jack-stands/ptt0/pt34115?q=jack+stands&pos=2

  • Archived

    Member
    August 28, 2021 at 3:05 pm in reply to: Need Tires

    In late April of this year I paid $566 at Perfect Circle in Waldo WI (near Sheboygan) to install eight (8) brand new Michelins I bought through a buying program. This included $65 to clean out the “goop” balancing stuff that had been previously installed in the tires and new Equal beads in all eight tires.

  • Archived

    Member
    August 28, 2021 at 10:13 am in reply to: Need Tires

    Bill,

    $1000 for tire labor seems a little porky.

    AL

  • Archived

    Member
    August 28, 2021 at 8:29 am in reply to: Need Tires

    When Prevost announced their “competitive” tire pricing, they are basically selling the razor at cost and making the money on the blades (install). They also state the “special price” is for installed only, no cash and carry. But, if they have them and no one else does…….

  • Archived

    Member
    August 28, 2021 at 7:19 am in reply to: New format

    Bill III, i wasnt suggesting new format was causing our issue. For some unknown reason Safari was blocking server info. TRuk did some investigation and found our problem was on our end. Erasing history I researched solved the problem, but i had to redo all my passwords. There’s more grief having to re-log in to everything including our alarm system, direct tv, Indio Calif cable acct, etc im not willing to re-do so soon. Thats all

  • Archived

    Member
    August 27, 2021 at 10:51 pm in reply to: New format

    Thank You,

    AL

  • Archived

    Member
    August 27, 2021 at 9:09 pm in reply to: Our KC Independence Rd. bridge

    I’ve not seen this load shift / slide before.

    One lucky driver as damage seems confined on passenger side.

    AL

Page 49 of 2304