Archived
Forum Replies Created
-
Excellent info and pics. Thank you, Chuck!
-
Jon-
Ok, I will ask the admins.
I’m all for getting rid of any weak links. Prevost did the entire airbag job, I would think they would use the best/new fittings as I paid to have everything suspension related replaced, ie, all bags, all norgren valves etc.
Do I have to tell them specifically to not use push in fittings?
-
This conversation is a perfect example of what owners MUST know about their coach. Over time we get a sense of how much room we need to make a turn to avoid rolling over a curb or entering oncoming traffic. The same applies to transitions such as places to high center the coach or to end up with the coach front and rear bumpers on the ground and the wheels hanging.
I am not aware of any formal training or information regarding limitations so the bottom line is experience becomes the teacher. We always gain experience seconds after we wish we had it.
-
Chuck: Been there, done that! (too)
At our previous residence the driveway was a slight incline. Not a hill, but a slight, steady incline from the road back to the garage and shop. When we went on a trip, we typically pulled the coach to the incline of the driveway and hooked up the car with the coach running. When parked like that My wife would always say, “The back isn’t up to ride height yet.” But it was up as high as it would get in that location. I realize there are probably ride height valves in the back (I think), but I often wondered if the coach being on that incline caused the coach to “naturally” sit a little low in back.
Extrapolate that to various situations we find ourselves in with our coaches. Like transitioning from a street or road to a driveway where we have to pass through a gutter (almost ditch) along the street or road. I’m sure it often takes a while for air the suspension system to adjust to all the constantly changing positions of the coach … which might result at some point with an unwarranted collision between the coach and the road.
-
Early in our coach ownership life we were naive. We bought one of those flow through long handled brush devices. In theory it looked slick. In practice though when it was full of water (now heavy) and hooked to the hose (more weight on the end to drag it down) I found it awkward to use at best. I think the first time I used it I washed the coach from the curb side engine bay to entertainment bay and had to take a nap.
I still use the device, but rarely hook up the hose. I use a hand sprayer on the hose now. Easier to handle. I put quick disconnects on the device (all my hoses and all coach garden hose connections have quick disconnect fittings). If its windy out I often will hook the hose to the device so I can wet and rinse the high parts of the coach that the handle sprayer can’t reach due to the wind.
I typically use a liquid automotive car wash soap in the bucket. If the coach was really, really dirty I used to toss in a little Dawn; see below.
On one of the Prevost Facebook pages when I mentioned that I’ll use Dawn in the bucket if the coach is really trashed, I was quickly chided for using Dawn because its apparently harsh enough to take the wax off the paint. I suppose it is. Not sure if I’ll continue to use Dawn. I guess we want something aggressive enough to clean the coach, but not harsh enough to go after the wax. I was also cautioned to use a special brush (lamb’s wool?) because synthetic brush bristles can scratch the finish on the coach.
I’ve been to Blue Beacon two or three times in eight years of ownership. But due to reports of acid in the BB system (they might recycle the water), I’m rethinking that. All the times we used BB we splurged for the Rain-X treatment. That seemed to last many months, maybe a year or more. When the coach was dirty and it rained later, I’d say the coach was 98% “clean” just from the rain, clean enough I didn’t feel the urge to wash the coach.
-
My Bus is good for about 2 weeks before I see any height loss. at about 3 weeks, my aux air is down to the point where the tag lifts. At this point the rear has dropped slightly due to the added weight but the front is up pretty good. At about 4 weeks i can visually see the bus is lower, level but lower. At 5-6 weeks it is low enough it can’t be driven. My suggestion is one of the Whisper Ultrasonic leak detectors, i was a soapy water guy for a long time, I purchased a whisper after the Wanderlodge Rally and really like it. The day I brought my bus home, the leaks were so bad i just dumped the air when i parked it so it wouldn’t look like a drunken soldier. When i replaced all my bags i had no leaks, then after about 2 weeks i was leaning overnight. I had a leaky fitting on top of one of my bags, pulled it, reinstalled it, and been fine since. As has been stated many times, Leaks are whack a mole, you have to decide what you are comfortable living with.
-
Weeks to months if you are able to get serious about all those leak points.
-
We have hard water here in California, I can only wash 1/4 of the bus at a time, then i use my leaf blower to dry it before the spots show up.
-
Dick:
I almost had the opposite problem. Turned up a hill that had a steep incline. Front end went up OK but trailer hitch dug in and almost lost traction on the drive wheels. Thank goodness for level low, I raised the rear allowing the drives to gain traction and recovered from my near hang up.
Chuck
-
Archived
MemberApril 10, 2022 at 10:55 pm in reply to: Air leak on push to connect, plus suspension leaksthe feed(blue lines are suspension) at the alum coupler pictured. Sort of splices air suspension from supply to front. I use the ferrules. Go to prevostcar.com enter the last letter in your serial then last 4 digits=unit number..Puematic diagrams.Take diagram to office depot and have them blow it up as much as they cam. Also have them lamanite it. Example my 1998 coach is W-6553.
-
Mike, yes for the ole school hub caps we have.
Here’s a link for the Meritor (Rockwell) straight non drive axles:
http://graphicvillage.org/meritor/mm2.pdf
see p.67 for the end play spec.
-
Now that I know the part number, I found them at Home Depot $94.79 Free ship to home
-
I asked Fred Pickering from AAP the Cruise-Air expert that question. This was his answer: “On a warm summer day, let’s say 80-90 degrees and high humidity, we would expect to see anywhere between 14-18 degrees differential, which would indicate the system was charged correctly and operating to the best it could.”
What are Cruise-Air users seeing?
-
Fleetfilter.com
NAPA 6623 = WIX 46623, a little under $100 by the time it was at my door last summer.
I bought a lot of other filters at the same time from them. Good prices and fast shipping.