Archived
Forum Replies Created
-
Larry, I don’t know how the panels on a H3 are held on but would think they are held on by adhesives. Composite siding has been held on by adhesive for quite some time in the RV industry with success. Composite material doesn’t likely face the same challenges as metal. Adhesives can be made that chemically bond to composites and composite siding doesn’t flex or shrink and expand like metal.
Gil
-
I’m curious why the move from Michelin,especially given the price premium you paid for the Continentals. I just replaced some of my tires with XA2+ Michelens. If I recall correctly the FMCA price was $565 plus taxes and installation.
Anyway,I hope they serve you well,
Gil
-
As the radiator is not warm tells you the thermostat has not opened.
You probably have a air lock.
Someplace is a bleed valve to clear the air in the system. The location will be in the owners manual.
-
Jon, I had taken the yellow with a little black paint insulation out a few years back and put black mud flaps in place of it, it seem to be doing a good job with sound and it looks a lot better.
I’m waiting for 6 Double coin tires to come over from China in a shipping container so I can try them on my drivers and tag, thanks to a recommendation from Roger and you. 🙂 $220/tire cheaper then the continental.
-
I’m sure it will Jon..
I wanted to add a question for Prevost since no one seems to know the answer and that is lots are wondering how the panels are attached on the “H” busses some wonder if they too are just held on by glue…. I don’t think that would be possible given the size and weight of the larger panels… must be hidden clips or chanels or snaps of some kind ?
I have read everything I could find on Prevost car for the exterior, construction, repairs etc., but couldn’t find anything on that.
I don’t have a problem… just curious… along with the others?
Would love to hear how they are attached.
Thank-you Prevost !
Diane
-
Dale,
I’m guessing here but I think your vintage coach has, front to rear a #30, a#3036 combo, and a #24.
You can check Prevost, but unlike air bags from Prevost have been the best prices on the planet, I think you might find the local Fleetpride or Truck Pro or any other store to be more competitive.
The #30 brake chambers are often on special and where I live they are sometimes in a big tote in the showroom for $30 apiece. Your local guys may have to order the #3036 or #24 (assuming I got the number right) but the combo was about $130 the last time I got one and the #24 was $35 or thereabouts.
I trust you will respect the killing force an uncaged emergency brake has and be absolutely certain you have it caged properly. I mention that because you may have to loosen the band clamps to orient the chambers to clear for assembly or to orient them for the hoses.
-
We did several years ago. It was actually ‘distance schooling’ as we were enrolled in a school which catered to the Hollywood actors who took their kids on location. There was a fixed curriculum which was graded, a teacher assigned; it was basically a regular school on the internet. Can’t remember the name but it was located in Ojai, California.
-
I know Deb and Eric, former owners of a Prevost did, not full time, but when they traveled. I can email them and see if they have any advice.
-
My use of the word “characters” was not in a demeaning manner, rather a cartoonish visualization of a garage.
Excellent advice you have suggested (as always).
The other thing I noticed is, occasionally, when slowing down, the jake would not work and those warning lights mentioned above would come on shortly there after, then, later, the jake would start working again. Sounds like a failing throttle sensor since the jake kicks in when the gas pedal is released, so I think we are looking for a bad connection or failing sensors or both.
Just spoke with the S.M. he said turbo boost sensor was not showing any codes.
-
I assume they are describing a no throttle as nothing happening when the pedal is pushed! It so, could also be the throttle position sensor at the pedal. I don’t remember the official part name, but the throttle is electronic.
-
Sammy,
It’s usually mounted in the same bay as your chassis batteries and up on the ceiling so to speak.
-
I can spell.
