Forum Replies Created

Page 2224 of 2304
  • Archived

    Member
    June 28, 2012 at 8:37 am in reply to: Maintenance bulletin Mi97-24 Prevost Question

    The test procedure for finding water leaks by pressurizing the vehicle can be done if you have the full a/c system. You just need to open the Evaporator door (driver’s side of the vehicle) and the system will presurize just fine. If you only have the dash a/c, then you would need to construct the type device we do with blower motors and a hose with a piece to fit into the toll window. Then you are able to pressurize the vehicle and spray suspected places on the exterior for air excaping. Remember that there will be area that will leak air and that is perfectly normal (window edges, etc.).

    This test will not help with luggage bay leaks as we do not heat or cool tghe bays. For these you need to check door seals and proper closure of the doors to be properly sealed (H3 VIP especially). Some bay leaks can be coming from above via the side panels. But this should show itself with the pressure test.

  • Archived

    Member
    June 28, 2012 at 7:23 am in reply to: Installing New House Batteries

    Very nice job!

    I don’t think I would have tackled that, even if my back didn’t hurt just thinking about it.

  • Archived

    Member
    June 28, 2012 at 6:18 am in reply to: Polishing/Waxing

    Real men (and ladies) polish their slack adjusters.

    Polishing copper is optional.

  • Archived

    Member
    June 27, 2012 at 11:43 pm in reply to: Foam on Underside of Chassis

    Two out of two Truk4u

    After I hit a piece of metal going around a curve I was sure I missed it. Not completely as it took out a chunk of under belly insulation.

    I found the yellow spray foam from HD or L was really close to what Prevost used.

    Spray the foam and quickly with a old glove work it around so to match the ramdon texter from Prevost. As you know the stuff expands so let it do its thing. Don’t worry about the foam color,

    Let it set up over night, next day with a large knife trim to blend with existing foam. I did a couple of touch ups and did a extra night.

    Paint a couple differant directions for good coverage.

    The flat black will match perfect after one trip in the rain.

    Oh, welcome aboard and I see you own a 2005 Marathon XLII. Nice to have some company, those Liberty guys were ganging up on me awhile back. Recently new Marathon owners have surfaced.

    Liberty’s have retreated to polishing there copper pipes.

    AL

  • Archived

    Member
    June 27, 2012 at 8:02 pm in reply to: Installing New House Batteries

    Working like a dog has rewards…………….


    Good job! I know who to call now.

  • Archived

    Member
    June 27, 2012 at 7:28 pm in reply to: Polishing/Waxing

    Real men wax their own buses!

  • Archived

    Member
    June 27, 2012 at 6:59 pm in reply to: Installing New House Batteries

    Batteries are the heart of our houses so keeping them healthy is important. Keep your battery connections clean and tight. Keep the connections at the inverters clean and tight. Program the inverters so the charging protocol is exactly as specified by the battery manufacturer. And lastly, recharge the batteries before the rate of discharge exceeds 50%.

    If you do all of the above your batteries should last 5 years.

    If a single battery fails prematurely you must replace the entire set and their dates must be the same.

    The last two statements separate the men from the boys. A quality battery manufacturer’s product is easily going to last five years if you observe the proper charging protocols and avoid deep discharges. A quality battery manufacturer will stand behind the batteries and if one fails will replace the entire set because they know that is the only way to properly maintain batteries.

  • Archived

    Member
    June 27, 2012 at 6:18 pm in reply to: Florida Coach Purchase Inspection

    Sam I would venture to say is a fortunate pilgrim indeed. I have never seen a PO (Previous Owner) go to the lengths of this nature on selling a coach and then following up after the sale.

    Usually it is “here are the keys.”

    And then right after that you get …. “The number you have dialed is no longer in service, please check to see that you are dialing correctly, hang-up and redial.” Often during the difficult times, late into the shank of the day, during those periods of serious head scratching, the word “Orphan” took on a total new meaning for me.

    In my case … “The owner of a second-hand bus knows how hard it is to drive a bargain.” Usually applied.

    BCO

  • Archived

    Member
    June 27, 2012 at 1:54 pm in reply to: Florida Coach Purchase Inspection

    Other than having Jon do it, I would without a doubt take it to Marathon. It’s right off of I-75. Nice people, quick response, and let’s be honest…..we need to keep them in business too!

    I bought mine from Liberty. It was definitely more expensive than anyone else, but EVERYTHING worked when they were done, and everything was caught up maintenance wise.

    I really would prefer to do what Jon did, but it wasn’t an option. Learning the systems is priceless. Because I don’t know them, it is pricey.

  • Archived

    Member
    June 27, 2012 at 1:17 pm in reply to: Polishing/Waxing

    Congratulations on the finest ’97 out there!

    BTW, I have washed, though not waxed, my own coach. I may even do it again someday.

    Make sure you are part of PUP. That’s where the fun is starting!

  • Archived

    Member
    June 27, 2012 at 12:12 pm in reply to: Polishing/Waxing

    Ahhh…. Jon you’re on to something there !!!! Branson 2013 ???

    Diane

  • Archived

    Member
    June 27, 2012 at 10:11 am in reply to: Polishing/Waxing

    Here’s the link, Al:

    http://zainostore.com/

    I use the all in one (AIO) product, with Z-6 finishing spray. Always wash with Dawn ultra first, then use clay bar, then apply Zaino polish, followed by the Z-6 spray. Then, only wash with the Zaino soap as needed. One bottle of “all in one” will do a whole bus, as will one bottle of Z-6. A little goes a LONG way. You can get clay bars from Zaino, too.

  • Archived

    Member
    June 26, 2012 at 7:34 pm in reply to: Erratic Gauge Readings

    Gil,

    Everything runs through the ECM, that big scary thing in the front bay. If it’s related to the ECM, Detroit, Prevost or most anyone else you find will not be able to help. You need to contact Nick Hessler, omnitech_nick1@yahoo.com. Nick worked for CC and actually did the electrical on my 2000 when it was new. Miles has the parts, but Nick is the go to guy.

    Nick is an Advertiser with us, but his Ad is down because of a snag on our end.

  • Archived

    Member
    June 26, 2012 at 7:19 pm in reply to: OEM muffler?

    I updated the post and corrected the link. Most places like Autozone, O’Reily’s, Pep Boys will carry some type of “flame proof” header paint. You should be O.K. witht he 1200 degree stuff. Follow the cure instructions and know that you will not like the smell as you cure the finish. But, that won’t last long.

    Look at it as Bling of a different color.

  • Archived

    Member
    June 26, 2012 at 7:08 pm in reply to: OEM muffler?

    That drawing is for a coach of “that vintage” straight out of catbase. I plugged in dale’s coach year and model and that is what came back. Now I may not be able to get the tounge unstuck from the eye tooth, but I believe that I see a splash pan on that bad boy. No?

Page 2224 of 2304