Forum Replies Created

Page 114 of 2304
  • Archived

    Member
    October 7, 2020 at 11:35 am in reply to: Two norgren valves in steering compt

    Don, I know that and hope if anyone is replacing those valves they get the correct voltage for the operating solenoids.

  • Archived

    Member
    October 7, 2020 at 11:02 am in reply to: Tom’s new ride

    Bill, I cannot be sure, but I think you just got the finger.

  • Archived

    Member
    October 7, 2020 at 7:59 am in reply to: Microphor

    Tecma has a smaller foot print, I did a build up and brought the toilet to comfort height.

  • Archived

    Member
    October 6, 2020 at 11:17 pm in reply to: Two norgren valves in steering compt

    yes, the coils on my auto leveling Norgrens are 12v, but can be changed to 24v and will operate perfectly. New from Norgren, I’m not sure if this valve comes with a 12v, 24v, or no coil at all. Call Norgren.

    I don’t use my auto level either.
  • Archived

    Member
    October 6, 2020 at 7:03 pm in reply to: Two norgren valves in steering compt

    Thanks, mine is actually labeled K41EA00 with no suffix letters/numbers. I have a couple photos from one for sale on ebay to compare.

  • Archived

    Member
    October 6, 2020 at 6:05 pm in reply to: Two norgren valves in steering compt

    That’s what I thought. Never use auto-level. Can I get rid of them?

    What will happen if I remove them and cap air lines? Theoretically, if I had a Liberty pneumatic diagram, could I disconnect air lines at the source?

  • Archived

    Member
    October 5, 2020 at 11:48 pm in reply to: The two most important things to carry

    Sincere condolences. God Bless

  • Archived

    Member
    October 5, 2020 at 6:41 pm in reply to: Microphor

    This is probably your problem area. The toilet has to come out to repair. I’ve done 2 electric Microphor’s, took them out of the bus and rebuilt in the garage. Heavy toilets and you have to get the adjuster just right or the flapper will leak.

    My 04 Marathon was a Microphor air, took it out at Jeff’s and replaced with Tecma, the only way to go.

  • Archived

    Member
    October 5, 2020 at 1:31 pm in reply to: Microphor

    Tom, my bad…too much going on…it is LF 220 electrical unit.

    Do you have any archive pictures that you can share please?

    Talked to Microphor this morning, they suggested the cam assembly could be broken, out of adjustment or spinning on the shaft if the setscrew is loose.

    I could not feel anything loose there, will verify with out water this afternoon if the motor is running when lever is depressed and if i can feel the shaft turning.

    I believe cam is solid on the shaft, if I push the flapper down with a stick, with considerable force, the flapper is opening and I could feel the clevis assy moving a little.

  • Archived

    Member
    October 4, 2020 at 10:42 pm in reply to: Front entry door handle broken . Will not open!

    Unfortunately, we had the entry door lock break on our H345 in 2015. We were in Santa Rosa, NM, at a RV park. The park had a restaurant on the property so as we were leaving for dinner and when I went to lock the door, it sounded funny. I tried to reopen the door and it would not unlock.

    A call to AAA was useless. We ended up having to stay in the hotel next door until the next morning. Can you imagine, no toothbrush, toothpaste, PJ’s, etc.?

    The next morning, a call to PASS (Prevost Action Service System) really didn’t help much. I was thinking we would need to have the windshield removed but with the help of the campground owner, he managed to put together an extension PCV pipe with a angled pipe on the end and was able to reach the door handle lock to slide it open. After a million tries, it worked! I gave him a nice tip and we were on our way.

    I took the coach to Prevost Mira Loma for the warranty repair. After that experience, I still never feel comfortable with that lock (bad memories). Thank goodness I had taken the keys with me as I could open the driver’s bay door to use the emergency electric window button to put down the window for the guy to get to the door handle.

    Mark

  • Archived

    Member
    October 4, 2020 at 8:07 pm in reply to: This video could save your life

    Years ago i had a front right blow out . It happened so fast the only thing I could do was hold that wheel in a death grip . After what seemed like forever i applied the brakes . Since then I replace steer tiers every 3 years and do my best to keep thumbs out of the inside and be alert . Can’t do it all the time but I try . Especially on bad roads and driving over 65 . just sharing my experance .

  • Archived

    Member
    October 4, 2020 at 6:32 pm in reply to: This video could save your life

    It was educational to learn that if (once we finally take delivery of our coach) I were to be using the Cruise Control with the Transmission Retarder and experience a blowout…by accelerating that would disengage the Transmission Retarder. And, that by letting off the pedal (once re-establishing control) should be able to steer the coach over to the shoulder – as traffic allows.

    Would I have to manually disengage the Cruise Control to slow down? In our cars, if the Cruise is on you can accelerate…but, once you let off the gas, it returns to the set Cruise speed. Would expect the Prevost to do likewise. Since we shouldn’t touch/tap the brakes during a blowout…will need to be cognizant to manually disengage the Cruise Control.

    Sorry, just trying to play out the entire scenario in my head (hopefully/praying to never actually encounter while driving!).

    That video is quite timeless, exceptional and enlightening!

    Thank you again, Al and Jon!

  • Archived

    Member
    October 4, 2020 at 3:29 pm in reply to: This video could save your life

    Thank you for your comments, Greg.

    As you tour this thread the postings go back to 2013 with lots of info and stories.

    My favorite is the poster who “bragged” about his front axle blow out and how he handled his RV nearly killing his entire family plus dog. This driver did everything wrong.

    AL

  • Archived

    Member
    October 4, 2020 at 10:00 am in reply to: Jake Rebuilt

    Unlike other RV s Prevost knew the coach could not sit idle for long so they engineered the coach for a easy engine replacement or repair . Just a guess here but would make sense if true .

  • Archived

    Member
    October 3, 2020 at 6:56 pm in reply to: This video could save your life

    Excellent response, Jon. Exactly the description I was needing.

    Also, sorry – the Benny Parsons link is active (watching it now).

    It was the 2nd link in your 3rd Post that couldn’t identify the server to open.

    Grateful for your and Al’s advice.

Page 114 of 2304