Forum Replies Created

Page 112 of 2304
  • Archived

    Member
    October 14, 2020 at 8:16 pm in reply to: New used bus

    I am not at all concerned about “driving” a 45′ coach. There are places we like to visit that makes driving a 45′ coach out of the question or “iffy” and I would hate that. We also live where we work so being able to fit a 45′ coach in the space available might cause issues as well. We expect our best chances of finding a coach that meets the wife’s needs is going to have us buying a 45′ but our 40 works great for us!

    We were planning to go to Panterra to look at that coach but it is now showing as sold. The 98 40′ is just too dark for our tastes (and other issues) but we are stalking every coach we can find.

  • Archived

    Member
    October 14, 2020 at 4:51 pm in reply to: CLARKE POWER

    I am in the process of writing an article about Prevost Nashville. This is because I and most of us were unaware of the scope of what they can do and the particular strengths the Nashville facility has.

    As Dick points out not all service centers have the same focus or expertise and my article will cover Nashville, but when I make a post about the article when I get it finished I will be seeking others to write articles about branches they use, the strengths found in that facility and the scope of work done. Prevost tries to have uniformity, but because of regional influences different Prevost Service centers develop and put in place abilities best suited for their market.

  • Archived

    Member
    October 14, 2020 at 4:38 pm in reply to: New used bus

    Chuck

    No one said anything the 1st time you posted that picture.

    1st off there is no XL3, there is an X3 but that bus ain’t one of em with stainless. That framing is for the composite sides they put on Greyhounds and seated coaches.

    For you new guys out looking at coaches it’s hard enough without some idiots out in AZ doing YouTube stuff on delam that are using headlines for click bait and don’t have a f*^king clue what there talking about.

    Your best help are from owners who have been in your shoes, there’s plenty of us out here. Let common sense guide you.

    Later

    bv

  • Archived

    Member
    October 14, 2020 at 4:38 pm in reply to: CLARKE POWER

    Jon: Thanks so much for the follow-up on your story. Its good to hear that at least one Prevost shop can do Detroit Diesel work.

    But Prevost owners beware. I’ve been to two different Prevost shops. One did excellent work, I was very pleased with the overall billing, and have high recommended it. Sadly … it is now apparently closed.

    My experience with the second shop was on the other end of the spectrum. While they diagnosed the problem (leaking transmission seal, second time since 2014) and replaced it … some other things I had them do and ask them about left me very, very reluctant to go back. Then the invoice came which I challenged and after telling the accounts payable dunning person from NC or Quebec I was waiting for their shop to respond to my questions about the invoice, appropriate adjustments were eventually made. (I’ve been told by “the locals” that there has been a change in the management of the shop.)

    So … morale to the story … not all Prevost shops are created equal, have the same capabilities, and are qualified.

  • Archived

    Member
    October 14, 2020 at 1:51 pm in reply to: Window Shade in Marathon

    I had years ago checked with a local dealer about changing the shades in my 99 CC.

    The prices were abnormally expensive.

    If I remember they were several hundred dollars each and that was just the price of the shades.

  • Archived

    Member
    October 14, 2020 at 12:26 pm in reply to: New used bus

    Our 97 CC 40′ is consistently in the 8.5 MPG range driving the mountains of the west coast. CA has a 55 MPH speed limit while towing so it is always a leisurely drive when going south from here. Going north or east we drive the truck speed limit. We have the IFS so I have no experience with a beam axle unit. Lift the tag and the turning radius is impressive. Many of the places we stay in the west would be difficult for a 45′ unit so we remain happy with our 40′ non-slide.

    Jerry

  • Archived

    Member
    October 14, 2020 at 11:56 am in reply to: Window Shade in Marathon

    Can anyone provide an @estimate for how much it might cost to change the solid Hunter Douglas shades out to the Hunter Douglas Silhouette shades for a non-slide XLII? Really like the idea of being able to see outside during the day – while maintaining privacy.

    Do the Silhouette shades require a different motor?

    Thank you,

  • Archived

    Member
    October 14, 2020 at 6:59 am in reply to: Cruise Air Problem

    Being especially lazy and getting worse I am always starting project now by doing the easy stuff first.

    I cannot think of an easier step to begin analyzing your problem than calling AAP. They likely are going to be able to steer you to the initial steps required to isolate what is wrong, maybe without even using tools or getting your hands dirty.

  • Archived

    Member
    October 14, 2020 at 12:35 am in reply to: Can’t Find A Replacement Exhaust Blanket

    That’s awfully pretty!

  • Archived

    Member
    October 13, 2020 at 10:19 pm in reply to: New used bus

    Bill

    IFS ( independent front suspension) starts about vin T-5873. A 1997 XL. Dont if it was 40 or 45, but I think it was a 45 XL Marathon

  • Archived

    Member
    October 13, 2020 at 6:50 pm in reply to: New used bus

    Bill, do not be concerned about 40 feet. After about 15 years of 40 foot ownership we got our 45 foot 97 XL and the first thing you are going to notice is with the model year range you mention it will turn in the same or less space than the 40 footer because of the IFS.

    Free advice: Stick with rivets. You can send me the money you save on fuel going from about 5.6 MPG to as much as 8 for my free advice.

  • Archived

    Member
    October 13, 2020 at 5:04 pm in reply to: Can’t Find A Replacement Exhaust Blanket

    I called a few exhaust blanket manufacturers. Of the ones I called most were reluctant to even discuss making just 1 custom exhaust blanket. Some wanted me to order 5 or more of the example that would fit our coach or the length needed to be much longer to make it worthwhile for them. Of the manufacturers I called only one was agreeable to making just 1 custom blanket.

    That company was Firwin Corp. They made me a custom fit blanket at a very reasonable price. The only complication was I didn’t have have a reasonable way to send them accurate dimensions, mostly the angles and the twists. I sent them our exhaust pipe from the turbo exit to the muffler to exactly match what we needed. The exhaust blanket that they made fits perfectly and is of excellent quality.

    The only thing that added complexity to the process is that Firwin Corp. is in Canada. If I were to recommend to someone how to get a custom exhaust blanket made, I would recommend that they make a few more calls than I did and use a U.S. company to make it a little easier.

  • Archived

    Member
    October 13, 2020 at 11:09 am in reply to: Cruise Air Problem

    Chuck, Don may be right, but give AAP a call (contact information is on our advertisers site) and speak to Dana or Fred and see what ideas they might offer.

    I don’t know why but when I first read you post my brain went to locked compressor.

  • Archived

    Member
    October 13, 2020 at 10:39 am in reply to: Cruise Air Problem

    Another guess is : a bad capacitor? There are 2 capacitors on the condensing unit. One is a “run” capacitor, Grainger pt# 30D620, and the other is a “start” capacitor, Grainger pt# 6FLUS5. I’ve had these go bad, but it never caused the breaker to trip. Maybe it would have if I didn’t monitor the amp meter at their initial start each time I use them.

  • Archived

    Member
    October 12, 2020 at 11:01 am in reply to: Problem

    No!

Page 112 of 2304