Forum Replies Created

Page 110 of 2304
  • Archived

    Member
    October 22, 2020 at 6:00 pm in reply to: Advice when buying used coach from converter?

    Thank you to everyone who responded!

    I have had great interactions with everyone at Millennium and I am glad the community at large has too.

    I am going to keep moving forward with this purchase. I am excited to join the family and community here!

  • Archived

    Member
    October 22, 2020 at 9:46 am in reply to: Window Shade in Marathon

    One of the yachts I was running had over two dozen of the older somfy blind motors with the end pieces stripped out. Changing to the newer style was not only expensive, but a bit of re-engineering had to be done. So found someone with a digital printer and gave them the one good end piece I had. They printed me a lot of the end pieces and problem solved.

    Lot cheaper than replacing and re-engineering. Do not have the contact info for the guy that did it anymore, that was about 8 years ago so technology has advanced and your results should be even better.

    Chuck

  • Archived

    Member
    October 22, 2020 at 8:44 am in reply to: Window Shade in Marathon

    Thank you Ed…so that entire section is one long piece hold in place by Velcro? Then, under that must be the wood piece I see thru the small opening…I will take pics when I remove, so we can share with others.

    Can you point in your picture the drill/screw location to hold the drive wheel connected to the motor?

    How long ago, you contacted Marathon about the “hidden” stock, have you talk to Faye or someone else? I know the parts manager is no longer there…

    Thank you!

  • Archived

    Member
    October 21, 2020 at 8:33 pm in reply to: Advice when buying used coach from converter?

    WOW, 1744jr bought a 20,016 and I am struggling to find the money to buy a 1998! I am still hopeful that it all works out as it’s time to move on from my 1988. There’s nothing like time travel to make you extremely rich! (That’s a joke folks!)

  • Archived

    Member
    October 21, 2020 at 5:22 pm in reply to: What is this sensor

    Is it this sensor Synchronous Reference Sensor (SRS) Tells where top dead center is??

  • Archived

    Member
    October 21, 2020 at 12:54 pm in reply to: Over 40 foot drivers license? In Calif

    With that license I bet you have a white line on the floor behind the drivers seat.

  • Archived

    Member
    October 20, 2020 at 1:31 pm in reply to: Questions about plugging in

    People have asked “why don’t we leave the bus plugged into shore when we’re not using it?”

    The #1 reason is: we’re not made of $$$. If you are made of $$$, there is no good reason to read any further.
    Since nothing lasts forever, and I prefer to replace things later and not sooner.
    In case you didn’t know? when plugged into shore power:
    #2, the transfer switch is activated and there are various parts in it that don’t last forever
    #3, inverter/chargers aren’t 100% efficient and don’t last forever. We eventually had our old Freedoms fail us, once when we were on the road, so we lost use of everything on that inverter. We installed 2 new Magnum units at a DIY cost of nearly $4k. The Guest chassis charger is cheap either. Again, they won’t last forever and they’re not 100% efficient. Since we’re smarter than a smart charger, we’re able to use two $10 battery chargers to keep all the bus batteries charged. We make sure they do a good job. When and if one fails we aren’t out a bunch of $$$ like we would be if we were using the onboard chargers.
    #4, we empty the frig/freezer between trips, so there’s no need to leave the frig/freezer on. It does no harm turning it off. Its a freon refrigeration unit like an air-conditioning unit.
    #5, from what we can see, keeping an air-conditioner on all the time only makes our hard earned $$$ fly away to the utility company and the CruiseAir parts manufacture(s).
    There’s more than 1 way to skin a cat, this is ours. We hope it helps.
  • Archived

    Member
    October 19, 2020 at 2:00 pm in reply to: Wood Flooring

    All,

    Thanks again for the replies. The flooring shown in the posting’ are absolutely beautiful. I will give consideration to each of the suggestions.

    One of those hardwood flooring stores is really close to me. What I need is very little, say 120 square feet, for the living room. Maybe I can an overstock or discontinued of porcelain, LVT, engineered that will be suitable to my best half.

    R

  • Archived

    Member
    October 19, 2020 at 8:47 am in reply to: Questions about plugging in

    In reviewing the online manuals, I see that the chassis batteries are behind the right rear engine bay door (head swimming with what I can remember!). Would that be the likely location to find the 24v charger?

  • Archived

    Member
    October 18, 2020 at 10:10 pm in reply to: Anyone change dash air compressors to rotary one

    That’s really great. Wish I would have been told the right info.

    Those old compressors didn’t last very long and vibrated like crazy.

  • Archived

    Member
    October 18, 2020 at 10:09 pm in reply to: Anyone change dash air compressors to rotary one

    I would like to talk to you about the change out

    Previous post says hose replacement required.

    Interested in the part numbers you quoted

    cell 919 252 7220

  • Archived

    Member
    October 18, 2020 at 8:08 pm in reply to: Wood Flooring

    Bernie, in that photo you are making Deborah work too hard! Jus kid’n….. I know that’s not her, she’s getting a mani/pedi at the Marathon beauty salon!

    You have certainly built a beautiful coach!

    Safe travels,
    Mark

  • Archived

    Member
    October 18, 2020 at 11:57 am in reply to: Questions about plugging in

    The cooling fan in the driver side , bay #2, is a pancake fan in the upper left corner in that bay. I had to replace mine last year as the bearings went out.It makes quite a noise when it goes bad. In the bottom right side of the cabinet you should find 2 round soffit vents that let air into the cabinet, make sure they are clean on both sides to allow air flow through the cabinet.

    The fan is a 110V unit in my coach held in by 4 screws, and 2 female electrical connections. An easy DIY project, and the fan is easily found on Ebay or Amazon. It is live with the inverters so shut them off before removing the electrical connections.

    My fan was a Sunon SP101A, PN# 1123 HST, 115V/60Hz running 0.21A

    They make cheap plastic replacement models, but this one is aluminum.

    I live in South Florida and keep my coach in a covered storage facility, but it is open to the ambient temps of South Florida. So I always keep 2 A/C’s on and alternate their use about every 2 weeks. This to keep the humidity down in the coach. I turn off all other power sources except for the A/C that I am using, Keep the engine 24V charger and both of the inverters on. I have no slide so I keep the Aux compressor off.

    When returning to the coach, I power up everything and turn on the Aux compressor and let it run for a while before starting the engine, so the engine belt tensioner has air to it to avoid flipping a belt off at engine start up.

  • Archived

    Member
    October 18, 2020 at 7:13 am in reply to: Wood Flooring

    We use engineered wood in all the floors. Dimensionally stable. I cut tight against the walls and cabinets. Adhered with urethane adhesive. Doesn’t move, repairable. Looks elegant.

  • Archived

    Member
    October 17, 2020 at 3:46 pm in reply to: New used bus

    Thanks for the tips and leads everyone! Seems we are always in the wrong place at the wrong time but we may have to fly out and take a look at a few of them.

Page 110 of 2304