All Updates

Yes, I just add in a little at a time and watch the indicator as well as wait a few min and see the temp at the dash. I set the temp down to 55 and fan on high.

So do I just hook up the can and then open the suction valve with the engine running and pull the trigger?

Every summer ( over the last 10 years) I end up adding 1/2 to 1 can and at $10 a can at Walmart, it has been easier to do this than find where the loss is coming from

Alex

You will be chasing air leaks for the duration of your Prevost ownership. When you find a leaking push on connector be sure to replace it with a compression fitting. Eventually, as you get more and more of these replaced the frequency will be dramatically reduced. Then you start over again with replacing all the leaking Norgren valves! Good times!

It’s easy, just use liquid dish soap like dawn around the window and on the cord when you reinstall it.

Hmm, I will call a local glass place tomorrow.. And yes, it has the cord in the center of the gasket.

Thank you