Forum Replies Created

Page 161 of 214
  • Dick

    Member
    December 2, 2015 at 12:28 pm in reply to: Lost Power to Bus

    Jeff Rowe told me that if I was ever going to leave the coach unattended for any length fo time, I should turn off all the power.

    Chassis: Cut the chassis batteries by turning off the 12 volt and 24 volt switches in the engine bay.

    House: In the electrical bay, turn off the switches on the main lines from the house batteries. If you have a “24 volt coach” there will be both 12 volt and 24 switches.

    Toss the ice in the freezer and make sure the refrigerator(s) and freezer(s) are empty.

  • Dick

    Member
    December 2, 2015 at 10:53 am in reply to: SETTINGS

    Chris or Jim, perhaps you can cut and paste it into an email?

    We used to allow 100% access to reading the forum but we required a log in about a year or so ago because every time we would visit advertisers we did not show the type of numbers they wanted to see. Since log in is now required our membership now reflects more accurately the number of people who visit the site routinely and large numbers are not only of great interest to advertisers, the large membership list enables us to get better benefits for our membership.

    There is a not so nice side to the restriction of access. Unlimited access by non members also has resulted in people with an axe to grind to take posts out of context or use posts and articles as objects of ridicule for their own perceived benefit. So we have gone even further. We now can limit who can even open the site, much less access or see any part of it. There are too many people who appear to be happy when they are messing things up for people who have a good thing going. And I don’t mean that for just Tom and I, but people who would like to undermine the benefits we all can enjoy through the site.

  • Dick

    Member
    December 1, 2015 at 9:40 pm in reply to: Rumors were true…reprint of press release

    Here another slant from RV Business. No mention by name building a Country Coach

    http://www.rvbusiness.com/2015/12/winnebago-to-build-diesel-coaches-at-ore-plant/

  • Dick

    Member
    December 1, 2015 at 11:34 am in reply to: EGR equipped engines.

    Lean fuel mixtures causes high cylnder temps, witch allows oxygen and nitrogen

    to mix causing NOx emissions.BAD stuff . So they introduce exhaust gas back into

    the cylnder,wich is enert,like throwing ashes on a fire,to reduce cylnder temps

    hence EGR. Wich in return reduces engine power and produces more particulates

    Where the manufactures calibrators find themselves in a complicated balancing act,

    with emission laws

  • Dick

    Member
    December 1, 2015 at 9:09 am in reply to: EGR equipped engines.

    I appreciate the info. There is always something new to learn.

    I know that pollution controls on engines drives some people crazy. What I do like, is the cleaner air that is obvious in the Los Angeles area compared to what it used to be. The smog has been reduced significantly.

    When I start my old ’64 car in my garage in Palm Springs, I can’t stay in the garage very long, so many fumes! The new cars are so much cleaner!

    Safe travels,

    Mark

  • Dick

    Member
    November 30, 2015 at 11:22 pm in reply to: Rear driver side dropping

    Everything you want to know about your level low system is on the webinar pod cast at Prevost Car Site, including color diagrams. It helped me understand it better- lots of pictures.

    Webinar 2013-03-21

    Robert Hill

    Training Manager

  • Dick

    Member
    November 30, 2015 at 10:51 pm in reply to: EGR equipped engines.

    Are we talking about the same guy that can’t spell POTATO ???

    Bill S.

  • Dick

    Member
    November 30, 2015 at 5:38 pm in reply to: TN INT 24 JUST SOUTH OF MURFREEBORO

    Half way between SE Wisconsin and Central Florida. How thoughtful!

  • Dick

    Member
    November 30, 2015 at 5:35 pm in reply to: PC/Parliament Air & Coach Concours Winter AutoFest

    Anyone who thinks I could give a seminar on anything must be kidding !!!

    I would have to have Ben and or Rick in my back pocket to pull that off !!

    So looking forward to meeting new folks and puting more names and faces together !!

    Cheers, Diane

  • Dick

    Member
    November 30, 2015 at 7:39 am in reply to: LED Marker Lights

    Dick,

    Same location he just drilled 3/16 holes in the skin. 3/16 is much larger than was needed. I guess he thought “Let the next guy worry about it “.

  • Dick

    Member
    November 29, 2015 at 5:58 pm in reply to: Bring a cart with you.

    Nice job on the cart and article. I almost got a hernia in Lakelant trying to squeeze a freaking 315 Hummer tire in that bay with all the rest of the crap Jon was carrying. We were both on our knee’s banging our heads on the damn slide, wheezing, sweating like pigs and Jon pushed so hard he farted at which time I tried to stand up to miss the vapor and almost knocked myself out on the slide. He does need an H.

    So now we know you actually can squeeze 10 lbs. of crap in a 5 lb. bag. As a side note, I could load the cricket in my H while riding it. In fact, I could ride right on through the bay, kind of like a pull through. Really, would I stretch the truth…

  • Dick

    Member
    November 29, 2015 at 12:05 pm in reply to: LED Marker Lights

    I will accept Wallered as a word, cause I have done plenty of it in my 66 years of doing stuff.

    Thats what I should have done to get all the screws stainless, but now you have given me another project to do.

    Love those lights.

    I also replaced all my upper marker lights with LED’s.

    Aside from the look of the LED light I really like the new shinny plastic lenses.

    Safe travels.

  • Dick

    Member
    November 29, 2015 at 11:21 am in reply to: LED Marker Lights

    Mornin’

    Dan,

    All of my old lights worked also and I never lost a bulb either but after seeing Buddy’s gorgeous vintage coach I just had to get me some of those lights!! Just so happens ole Bill was right there to make it happen for me. He didn’t know me from Adam but took my address and sent them too me!! Once I started opening the old ones up, they were in really bad shape. Not only were the lenses all chalked out, the inside fixture was corroded and brittle. It was time!
    You also said you didn’t use the inside screws, how did you get ground to your lights? The ones I have have a ground tab that is grounded through the skin.

    Davy,

    Yes sir on the 12 volt, and they fit exactly like they should. The wiring was the same also, the inner light came with one hot wire and had a ground lug on the other. I had to cut off a male connector that I didn’t need. The picture tells you the rest!

    Dick,

    My coach has only one wire “hot” the ground is picked up through the stainless skin. The gaskets looked dried out but they were still soft and flexible. The seal or gasket behind the stainless Prevost light guard was in super good shape so water intrusion will not be a problem. Once I removed the old plastic fixture and pulled out the wire some had 2-3 connections. I cut all of them out and used mechanical butt connectors and shrink tube. Solder makes the best connection no doubt but I have seen where the nokrode or paste has corrode androt the tiny wires in two.

    Buddy,

    I had a couple of the inner screws that were “Wallered” out. I’m not sure that Wallered is a word but you know what I mean. I ran a 10-24 tap in the hole and upsized the screw. I put in galvanized screws, if they last another 15-16 years I’ll be good.

    Steve

  • Dick

    Member
    November 28, 2015 at 1:00 pm in reply to: PC/Parliament Air & Coach Concours Winter AutoFest

    I thought the P&W R-985 was the best sounding engine of all time. But Merlin V-12 tops them all.

  • Dick

    Member
    November 28, 2015 at 8:11 am in reply to: Bring a cart with you.

    I would rather you contact Ken regarding cost. I don’t know if he was running show specials or not because I bought it at the Air and Coach Concours this month, and he has two versions and one seats four.

    I was under my front axle weight by an amount greater than the weight of the cart so I do not expect any problems in that regard. My net weight gain is less than the weight of the cart because I removed the joey bed on the cart side along with my inability to put some chairs and an aluminum table back in the bay. I also removed the rear basket from the cart. My net gain is likely 250 to 275 pounds.

Page 161 of 214