Art
Forum Replies Created
-
This is just a test on seeing if the bus bars will work with 4/0 cable lugs, Ordered some more 4/0 cable to finish.
-
Our condolences.
Life sure isn’t fair.
Chris
-
Good point, in case anyone has not seen an alternator current profile, here is an example of the 24V 75A alternator in my bus.
-
i believe there are many posts on this site and the others talking about this very subject. That’s one of the first things i learned on my bus where is the high idle and when should it be used.
-
Thanks for fixing that.
-
Art, use high idle if you need to sit and idle for extended periods of time.
-
I did If you look at this post farther back you will see it
-
Art, That is where the inflation number comes from. It is based on your actual weight not how bumpy the roads are. Find a CAT scale and get your actual weights, as this is where your inflation research should start.
-
I do have one and even the Michelin chart there are many different models of tires, my steer tires I had to buy Michelin’s because during Covid ,Toyo was not building truck tires so I got Michelin XZA 2 energy tires, I have had good luck with Toyo tires. I thought at 100 psi on Michelin steer was way to much but according to chart it should be between 90 and 95 psi so 100 is not to bad, Going through AZ was some of the worst roads I’ve been on, Maybe 5 to 8 lb’s less would be a little better. George told me at the Prevost XPO the Michelin guy said to mush air is hard on tires the rough roads beat up the tires. George said is bus was 400 lbs heaver on driver side steer tires, Slides and Gen I’m sure, I have never weighted mine side to side.
-
Got it back together. It’s tough putting it on and setting bearing preload without the prevost tool. Not sure what that tool is but they say they make one.
-
Sad day yesterday, we were communicating at 11:30 and when I called at 3:00 he was gone. Thoughts and prayers for the family.
-
I know you want to replace your toilet but it’s likely one that uses a direct drop into the holding tanks so no issues with air or macerator or water pressure. If you do replace it just be sure you don’t add to your headaches.
If you choose not to replace, call these guys for all your Microphor parts.
https://mullaney-associates.com/?srsltid=AfmBOoo5yXjOKyzQdN6yo-8-VCG-8DXo-qLlZk2Q550VI8u7iPWBKpOc
-
Called Prevost yesterday Crated up and Shipped to my door $337.99 If I pick it up $199.95 not bad.
-
This is a real crappy subject, i don’t think you will find much info. <