Archived
Forum Replies Created
-
Al, Our converters are all smart and the people that designed the generators are smart. I seriously doubt your coach was built without those protections in place. that suggests maybe they were not working. Unless we have owned our coaches from new or knew the history we do not know if someone modified something, disabled something, or if something never worked when it was supposed to.
But regardless there is no way to evaluate those safety features unless your generator is running as it should.
Keep in mind however, even if those safety shut down features work as intended, we still are obligated to monitor our gauges because typically any gauge readings that vary from normal are usually an indication something has changed, and that change may be a clue something is not working as intended.
Old pilots that live a long time usually get excited about and want to know what is going on even if the change they see is only a needle width of movement from normal.
-
I will leave that to Chuck Aaron
-
Hey Jon
long time, very good observation, definitely don’t want your wing moving relative to the airframe on fixed wing
-
I am not a generator expert, but based on your description of the overheating I would do two things. The first would be to fix the generator. It may be a head gasket replacement or it may be more complex, but obviously it has to be done.
My coach generator has a system in place to protect it that was designed and installed by Liberty so I can’t give you specifics. Your generator protection is either a part of the generator as built by the generator manufacturer or it is something your converter installed. Whatever it was it is up to them to guide you on how to insure you have those protections in place.
At the very least you need to have generator shut down if you have low oil pressure, low coolant level, or high engine temp. I suspect the float if there is one in the tank header was the coolant level sensor. But you also need a high temperature shut down. It sounds as if you either do not have one or both of them functioning so that is the second thing necessary. I would start by dealing with the generator manufacturer or converter to get that resolved.
-
God Morning PC , I thinking about why the generator overheated and did not shut down on it’s own .
I remember back in May the little tank at the top broke off . This was the first time she over heated . At the time the thinking was maybe just a bad weld . Well at least i thought that .
I did find it strange she did not shut down prior to that event , however dry camping and needing the genny, I just had it repaired and moved on .
So this week we will have the genny removed determine the issue and get her fixed prior to our west coast run in 2 weeks .
Any ideas on what to change repair ? I’m thinking have the Radiator cleaned and inspected . I still don’t know why she did not shut down . You would think the Genny should have shut down . Any idea on why it did not shut down ? I would hate to replace a head gasket without knowing why she overheated and did not shut down .
Thank you in Advance
-
Have had the pleasure of flying with fellow PC aviators on numerous occasions
-
Merry Christmas to you guys.
And traditions, even some forced on us by a pandemic, with family and friends can only be a good thing.
Harry
-
Just rec’d today the pneumatic upgrade kit for tag axle logic. Thanks to Steve Weiberg at Prevost Parts – this kit showed to be obsolete. Took a little while, but he was able to find one apparently in an obsolete parts warehouse, looks like it was in Canada.
Thanks to Don for posting that service bulletin with needed info on it.
Of the 3 kits shown, correct one for my chassis was 141906. Price total with tax came to $531. Date on kit box is 05/31/2012.
So for anyone interested may still be avail.
-
mike: I posted about my bus has covid; was referring to pilot valves and norgren valves doing strange /unusal new things. If you have old valve off and ends off see how easy spool /piston pushes. should be no drag. put a drop of air tool oil on it and check again for drag.. When new the spools were assembled with a little white grease to lubricate o rings against alum bore. I have seen that lube use it’s elastic effect when not excerised. Until your post I was ready to tear into the system again.. got me to thinking what could change a dramatic change.. Might even drop a drop or two in port to see if it loosens valve up/// not quart//// moisture is our biggest prob in air system because it developes a white powder corrosive reaction with the alum…If your norgren valve bore is clean and smooth –no scratches.. for action to be deminshied you can buy new oring kits for 12$ each. I hope this hasn’t been to rambling but also hopes it makes sense. these are all pretty straight forward and simple. Basically on or off -one direction of flow or other. I think that lubricant was luberplate.
-
That valve is the Norgren that exhausts air from the air bags when in manual mode and you are needing to deplete air.
Typically your 5 port Norgrens should be locking air in the air bags with the key off unless you have the older style system logic that requires accessory pressure. If your accessory air pressure is well above about 35 and you are leaking air I would guess a 5 port Norgen might be the culprit. Where and which way does the bus lean?
FWIW, as is typical with Norgren valves, if the pilot port is 12 as an example, that means when actuated it opens the path between valve ports 1 and 2. That might help with your diagnosis.
-
Thanks Jon, I assume when a new valve is put in it would likely eliminate that issue.
Also, I was reading the leveling system diagnosis piece you did a while ago. Very helpful and thorough!!
Don, Jon:
The prevost site did not have a pneumatic for my model number or year (96 XL with a T-VIN), but I did find a detailed diagram for the XL 45 elsewhere. I attached the appropriate section for my valve in question that is letting air escape (far right in the diagram). It seems to me that the actuator port is 12 which is attached to the top of the Solenoid rack labeled air supply. Normal port 2 is open to port 1 and 3 is closed, but when actuated by port 12 it connects port 2 to port 3. I attached the diagram from the valve as well.
If you think I am right on the above, any ideas on diagnosing the Solenoid rack “leaking” when not actuated?
My first time taking on this system obviously.
Thanks as always!!
-
Thank you for your thoughts and options to consider.
We went back to the Colorado to drive it this morning. It was a little close for Odie to swing her legs between the door post and the back seat. Not a deal breaker but a consideration.
The Jeep Grand Cherokee Limited we have focused on is a 2017. It has a great ride and ease of entry for Odie is super.
We have read about the “death wobble” on some Grand Cherokees. Does anyone have knowledge of that and the fix for it?
Davy
-
the Picture is the float switch that should shut engine down when water gets low. It has to be oriented properly to close when water drops down
-
Mikee, the temps I provided are from my Powertech Manual . So I think the temps depend on maybe which motor you have in the genny . On my BB the Powertech had a Kubota , this Prevost has a Isuzu . I guess it is safe to say temps over 200 need to be addressed .