Forum Replies Created

Page 62 of 2304
  • Archived

    Member
    May 24, 2021 at 1:20 pm in reply to: A quick brag on the guys at Marathon Grand Prarie

    It’s a very real problem, and one I didn’t really care about until it impacted ME! I’ve been told by some medical folks that this all started with an Obama era change in how hospitals were “graded”. Their metrics are things like management of patients heart rate, resp rate, blood pressure, etc. “Perceived pain level” was added as a metric back then, thus the easy way out was to prescribe one of the best pain killers out there. Unfortunately, horrid side effects. This has apparently all been unwound, but the use continues as a habit. Enough of my rant. I hope this gets solved one day……..

  • Archived

    Member
    May 24, 2021 at 11:23 am in reply to: Condenser Door Rubber Hinge Replacement

    I’ve read about those on the Bus Grease Monkey forum, but it looks like the source for compatible hinges (at least for GM buses) has passed away. It’s still in the back of my mind though.

    Upon closer inspection, I think the rubber will compress enough to squeeze between the end of the channel and that structural member. I decided to get a little aggressive in removal last night. My concern was losing the end of the rubber closest to the edge and then having nothing to grab onto. I used a linoleum knife to try to get some lubricant up into the track. I then tapped a punch at a shallow angle into the end of the rubber to try to get it started. After pushing and digging a few inches of the rubber out of the track, I realized I forgot to back out the set screws that hold the rubber in place. Whoops. If I can coax the rest out today, I think I can get the new piece into the well-lubricated channel.

  • Archived

    Member
    May 23, 2021 at 10:50 pm in reply to: JEEP TOWING

    Gee my chevy suburban is sure easier. Just turn ignition switch to on position, gear shift to neutral, control switch N position, gear back to park and ignition switch off , remove key. Start driving !!

  • Archived

    Member
    May 23, 2021 at 10:40 pm in reply to: A quick brag on the guys at Marathon Grand Prarie

    Glad to hear abt the repair service quality.

    Hope the post surgical recovery goes well. Remember doctors are legal drug pushers! That’s all they know to do.

  • Archived

    Member
    May 23, 2021 at 8:35 am in reply to: A quick brag on the guys at Marathon Grand Prarie

    I am sorry for the thread drift, but after my recent back surgery I had opiods thrust on me. By refusing them it was apparent I was troubling the folks who were responsible for taking care of me. Before my hospital discharge I had to refuse to take them or get a prescription for them to three different individuals.

    I’m sure they were all trying to shelter me from pain, but they did not understand the post op pain was insignificant compared to the pre op pain.

    That experience made it clear to me why we have an addiction problem with opiods.

  • Archived

    Member
    May 22, 2021 at 10:16 pm in reply to: A quick brag on the guys at Marathon Grand Prarie

    Fujimoto,

    My advice to you……do everything you can to strengthen your core and back before the surgery. It will help in your recovery. And…..stay off the opioids as long as you can before the surgery. You will be forced to take them for a few weeks after the procedure. Take them no more than 2 weeks. They are not good for you and you need to get off them as quickly as possible.

    Good luck. I’m 6 weeks post-op and have turned the corner on getting back to normal.

  • Archived

    Member
    May 22, 2021 at 9:31 pm in reply to: A quick brag on the guys at Marathon Grand Prarie

    Good to hear there is quality work and service out there.

  • Archived

    Member
    May 22, 2021 at 9:04 pm in reply to: Jack stand height

    Cool find! Being that they have been chopped off i wonder what their original purpose was. Maybe something to hold up a rail car?

  • Archived

    Member
    May 22, 2021 at 8:48 pm in reply to: A quick brag on the guys at Marathon Grand Prarie

    Marshall glad to here some quality work is still available, I also am looking at fusion of L5 after our summer trip ,oh well.

  • Archived

    Member
    May 22, 2021 at 5:16 pm in reply to: Jack stand height

    Dick

    I am going to cut these even, weld up solid, blast and paint.. find shims to adjust. $120 estate sale find…

  • Archived

    Member
    May 22, 2021 at 8:46 am in reply to: Jack stand height

    Brady, there are two heights required. I cannot remember what will work with an XLII, but my guess is the fronts will be around 13″ and the rear about 10″ or 11″.

    I will be able to get in the garage later and will try to get the exact dimensions.

  • Archived

    Member
    May 21, 2021 at 1:21 pm in reply to: Non slide resale value?

    We looked specifically for a NON-slide coach for a number of reasons when we bought our coach in 2014.

    1. Slide coaches moves you to the XLII series of chassis usually starting in 2000/2001. It seemed there was a significant jump in price from the XL/XLV chassis of the 1990’s that were non-slide. I just didn’t see the value to me/us for the additional nickels that would be required.

    2. I’m 5-7, my wife is shorter than I am. We don’t have young children or grandchildren (yet) who would be traveling with us. We felt we didn’t need the extra room. Now if I was nose tackle or center for the Thirteen Time World Champion Green Bay Packers … I might have had different thoughts about needing more room.

    3. Not seeing additional value in slides for us, I didn’t think the additional weight, maintenance, and potential risks for trip interrupting breakdowns of the slides was worth it.

    Since buying the coach seven years ago, we’ve spent 78, 100, and 100 continuous days in the coach traveling from Wisconsin to Florida to California and back home again. We were very happy with the space that Prevost provided us.

    There is demand for non-slide coaches. We’ve met many Prevost owners without slides and they see very happy with their coaches.

    As mentioned, there typically are distinct differences between an entertainer coach and a luxury motorhome conversion. Two fairly different missions. When you look at entertainer coaches, keep that in mind. Learn the differences as you look at coaches.

    You apparently have a unique mission for your coach. If I were you (I hope you realize that almost EVERYONE on this Forum loves to help spend someone else’s money!) I’d focus on what my mission is and the coach layout that I need to meet those mission requirements. Unless you end up with a true unicorn after purchase and likely remodel, the value will be what the value is.

    I’ve been closely watching the Prevost market for ten years. I’ve seen increased interest in bunk coaches over the last two years … apparently driven by families with kids who want to roam and grandparents who want to travel with the g-kids.

    You might want to contact Joe Goss at https://gossrv.com/ and lease one of their coaches that you think would meet your mission requirements for a few weeks or month. That would allow you to see first hand to see what works and doesn’t work for you.

    Good luck with your search!

  • Archived

    Member
    May 21, 2021 at 12:34 pm in reply to: OTR idler bearing

    Did you need a press to get them in/out?

    Chuck

  • Archived

    Member
    May 20, 2021 at 3:13 pm in reply to: Advice needed about Bus air

    OTR is something that is going to bring about debate because some owners feel very strongly about which is best, me included.

    Let’s start with numbers. A Prevost OTR system puts our somewhere between 90,000 and 106,000 BTU. It was designed to keep 50 passengers who are giving off heat, in central AZ in August comfortable. When such a system is installed on a coach it is expensive, and it takes up the equivalent of 1/2 of a bay so the market place does not necessarily embrace an OTR coach.

    But those are the numbers to keep in mind.

    An alternative to an OTR whole coach system is to rely on the house A/C units. Mostly there are two types. One is the 2 piece Cruisair heat pumps, or as an alternative there are the roof mounted RV type. The numbers here are in the range of 13,000 to 15,000 BTU to keep things cool for one unit. Generally a 40 foot coach will have three, and a 45 foot coach will have four of these units for a total BTU output of between 52,000 to 60,000.

    Most coaches that exclude OTR and are only provided with house units will not allow more than one or two units to operate from inverters. If the need is to have the entire coach cool then the solution is to run the generator and turn on all units.

    From experience I know if there is no OTR, and the coach has gotten hot inside during the day, every single roof or Cruisair running will take an excessive amount of time to overcome the heat put out by everything in the coach that has gotten hot. We were in 95 temps during the day on one trip and the camp ground lost power and our coach got very hot inside. We started the generator and ran all four units and it was midnight before the coach got comfortable. If we ran the OTR we would have had almost twice the cooling power and we would have gotten comfortable faster.

    Having both OTR and roof units is in my opinion ideal because one will back up the other. We have Cruisairs and if the OTR fails, sometimes the heat radiating from the highway can overcome the condensing units and little if any A/C is available. Roof units are in relatively cooler air so they will perform better on hot summer days. Their downside is noise level.

  • Archived

    Member
    May 20, 2021 at 2:49 pm in reply to: Non slide resale value?

    Dr. Gary, sometimes rational decisions are displaced by excitement relative to buying a coach.

    I cannot predict what financial gain or loss will come about by buying a non-slide coach. But I can give you some facts, not opinion.

    Slides when not extended do rob a coach of usable interior space. In most instances you can move about but the open space for moving about is a little less than in a non-slide coach.

    Additionally for every slide there is a potential loss of about 9″ per side. A two slide coach loses that space which occupies and hides the slide mechanism. That means a 2 slide coach can have up to 36″ of space missing, space that could have held a pantry or a washer and dryer or a full height closet.

    Slides add weight. Just to add a slide Prevost has to replace the strength lost by cutting a hole in the side of the coach through the truss that carries the chassis along its length. That added weight can be a couple of tons.

    Slides add complexity, require more service and more money to maintain. Replacing slide seals is age related and without labor the cost of seals is more than $2,000.

    But, for people who stay in one spot for longer periods slides change the character of the coach and make it feel less like a long train car, and more like a small apartment.

    So regardless of if a non slide coach will be of less value to the market place, just not owning a slide is a way to put or keep money in your pocket.

    Adding bunks, if recent posts are an indication may actually add value. As owners want to travel more often with their kids we see posts explaining how hard it is to find a coach suitable for family travel. If the conversion to bunks is done professionally, and is done with the ability to remove them and use the space for a washer dryer or more closets it actually may add value

    There was a time when we did a lot of trade shows, were rarely in one spot more than a day or two, and our coach was little more than a motel room on wheels that non-slide coach was ideal. It had significantly more usable bay and closet space than our current 2 slide coach. It was 45 feet, but weighed 6000 pounds less than our present 45 foot coach.

    But now when we use our coach it may sit in one spot for days as opposed to one or two when doing trade shows.

    There is one thing I really hate about our very nice two slide coach. Instead of having 315 tires all around we have 365 on the steer and tag axles. The advantage of our 6000 pound lighter non slide coach is a tire issue is usually not a big deal. With the 365 tires, it is a serious problem getting them so when we travelled for business we were far less likely to have a tire failure interfere with a business schedule.

Page 62 of 2304