Archived
Forum Replies Created
-
Bernie-
I just got the coach, and I really like it, so I plan on keeping it for a long time. It was in my price range, and will allow me to make some upgrades to get it current and reliable. I would like to get rid of the wet golf cart batteries, as they are hard to maintain and prone to corrosion.
I want to get whatever batteries is the best way to go. And if I need to add an inverter to make the system robust and reliable, I would do that as well.
-
Luc,
The weenies above didn’t mention I’m the battery guy, so contact me and we can go over your options. No matter what you buy, get rid of those nasty wet batteries and replace with AGM.
-
10-4 on the leak detector. Generally if the drain valves and the relay valves are good the brake system tanks hold air pressure for months. But for reasons unknown I have lost all air over night, likely a relay valve that didn’t seat properly, and then the system would be back to being air tight.
It is when the air loss is all the time that the system is due for some work.
-
The check valve has to be at the inlet side of the regulator or valve. I cannot remember which is first in line. The reason for that location is so when the valve is turned to exhaust air pressure the check valve is not downstream preventing that.
-
I have more questions now than space to add them. The biggest question is how are the house electrical circuits set up? Do all 120V AC circuits run through the inverter or are there only certain circuits like a refrigerator and outlets run through the inverter? It is troublesome that there is only one inverter, especially if the coach is typical and has things like a microwave, TV refrigerator, outlets, and other loads typically run through an inverter.
I would get rid of the golf cart batteries for certain and at the very least use comparable AH AGM batteries. Lead acid batteries are not only a pain to maintain, they have to be well ventilated or they can create a dangerous situation or corrosion. I would make absolutely certain the inverter battery charging protocols are exactly what is required for the new batteries.
The converter is an unknown and even worse, it sounds as if the previous owner also made changes creating some unknowns. This is a coach that might be very good, but someone needs to do a serious evaluation to learn if over the years changes have been made that left insufficient wire sizes, poorly thought out electrical management or over loaded circuits.
-
Is Prevost a good source for ac compressor’s ?
-
I’m not seeing that specific title when I search. I did find a NHTSA crash test video though.
-
Archived
MemberJuly 15, 2021 at 4:27 pm in reply to: Jake Brake light disable on Multiplex Chassis?Yes it’s in settings and Prevost can go in there and turn it off with the laptop.
But were checking on a possible wire you can also pull.
Prevost does not want to cut the wire. Go in and they can simply turn it off in settings.
like A1 said no concern with any DOT issue turning it off.
Later
bv
-
I have to wonder if it is possible to have not only two relay valve failures, and simultaneously have an ABS valve leak as well. The only relay valve leaks I have personally seen were air leaks to atmosphere. If it leaks into the brake chamber, and the chamber is leak free at some point you are going to have a very hot dragging brake and possibly a fire.
-
I get the same thing from my Avast security pop up. I ignore it, X it out and continue to PC site.
Chuck
-
Ace-
Where are these timers located, near the generator or in the coach?
The generator doesn’t seem hot, seems pretty cool in the bay, I have been running it with the bay door open. Has plenty of coolant, I will check the belt, but the water temp gauge seems to be running pretty cool.
-
I removed my OTR system completely. It’s just a paper weight for me.
-
Archived
MemberJuly 14, 2021 at 7:45 pm in reply to: I apologize to everyone going to ETLC.. So sorry!That’s not so Loc, Dee would not put me in the corner… And no, she does not read my forum posts.