Forum Replies Created

Page 31 of 2304
  • Archived

    Member
    February 25, 2022 at 9:33 am in reply to: Buddy Brown RIP

    You can see the funeral arrangements here for Buddy.

    Funeral

  • Archived

    Member
    February 24, 2022 at 3:21 pm in reply to: Buddy Brown RIP

    Buddy will be sorely missed. He was one of the nicest guys I have ever known.

  • Archived

    Member
    February 23, 2022 at 11:53 pm in reply to: Big Difference in SOC of the Chassis Batteries

    Don-

    I think you may be on the right track here. That there is such a difference in the SOC, seems to point to lack of battery equalization. And after I hooked up the single 12 volt charger to the Vanner, even after 3 hours, it didn’t change the SOC. I will check out the link.

    Thank you!

    BTW What battery load tester do you use?

  • Archived

    Member
    February 23, 2022 at 4:03 pm in reply to: Big Difference in SOC of the Chassis Batteries

    Don-

    All 4 batteries were replaced at the same time Date Coded 12/21

    And they were load tested at Napa to make sure they were all good.

  • Archived

    Member
    February 23, 2022 at 4:02 pm in reply to: Welcome to the Bus Barn Forum

    Really nice looking building, Tom.

  • Archived

    Member
    February 23, 2022 at 1:44 pm in reply to: Charging 24V Chassis Batteries With 12V Charger

    Hooking up two 12 volt chargers definitely charges the batteries, even though they show different SOC, they eventually get to 100%

    I tried the other method, one 12 volt charger hooked up to the Vanner. Red to 24 volt, black to 12 volt. 4 hours later there was no difference in the reading.

    **Wondering why we wouldn’t hook the RED lead to the 12 volt connection on the Vanner and the BLACK lead to the common ground, it seems like that would be a complete circuit?

  • Archived

    Member
    February 23, 2022 at 11:33 am in reply to: Coach not starting

    Sorry all, I’ve been busy so I will be working on the issues off and on this week. Thanks to all for giving me trouble shooting tips. I’ll post later this week if I have any sucess or no progress.

  • Archived

    Member
    February 22, 2022 at 6:36 pm in reply to: Big Difference in SOC of the Chassis Batteries
  • Archived

    Member
    February 22, 2022 at 6:13 pm in reply to: Charging 24V Chassis Batteries With 12V Charger

    If you use 2 chargers you would connect 1 to the 2 batteries that are wired as 12V and then the other to the 2nd 2 batteries that are wired for 12V. You can put a multi-meter on each set to verify a 12V output. So the chargers would be connected to the negative post of 1 battery and to the positive post of the 2nd.

  • Archived

    Member
    February 22, 2022 at 6:10 pm in reply to: Welcome to the Bus Barn Forum

    Until the C-Vid hit I was a track for a 30’x60’x16′ Sunward Steel red metal building, fully insulated, with a 14’x’14’ door, a 3-0 door, six windows high into the side walls, floor drains, etc. Price for the building at that time was in the $20K range. Bargain compared to today prices.

    I know Jon recommends a pit. I did, and still do, have a fear of animals making way into the building, and a wandering grand daughter.

    You may also want to check out the web site metalbuildingoutlet. They re-sale buildings that were not paid for. Could work out for you.

    Good luck.

  • Archived

    Member
    February 22, 2022 at 1:31 pm in reply to: what did you do to your Bus Today

    Last week I replaced the two outlets near the bed and the two upfront with these. Makes it so much easier for phones, iPads, computers, etc. In doing so I broke the Ramco mirror switch. Pissed me off but I took the opportunity to also replace the bezel for the switches. It was cracked at the one end since I bought the Coach and it always drove me nuts.

    Ramco was great to deal with and extremely responsive to emails!

    Bill III

  • Archived

    Member
    February 22, 2022 at 1:27 pm in reply to: what did you do to your Bus Today

    Yes they are out of business. I forget the name of the company I dealt with. I have the receipt in my book. It wasn’t cheap to replace the media but I haven’t had any issues since. Interestingly the shipping was almost as expensive as the material do to the weight.

    Bill III

  • Archived

    Member
    February 22, 2022 at 10:12 am in reply to: Welcome to the Bus Barn Forum

    40′ x 60′ here in Texas with (3) 14 foot doors. One bay is a pull thru. Wife had a fit when I had the barn built before I started the House. It’s already full. Wish I would have built it 50′ x 80′ like i had at the old place.

  • Archived

    Member
    February 22, 2022 at 12:47 am in reply to: Oiling gears on Series 60?

    Section 3 Lubrication System in Detroit Service manual:

    On engines equipped with an air compressor, a flexible, external oil line runs from a threaded hole at the top, front corner of the left side of the cylinder block, which is tapped into the main oil gallery. The flexible line runs to a fitting at the air compressor assembly.?

    Oil drains from the air compressor through a hole in the air compressor drive housing into the gear case.?

    Note: On early Series 60 engines equipped with an air compressor, there was a “T” fitting in the air compressor drive assembly. A flexible external oil line ran from the cylinder block to this “T” fitting and another line ran from the “T” fitting to the air compressor assembly.

    A flexible, external oil line feeds oil from the oil filter adaptor housing pressure gallery to the turbocharger bearings and shaft. This oil is returned through an external line to the block near the block oil pan split line and then back to the oil pan

  • Archived

    Member
    February 21, 2022 at 6:55 pm in reply to: what did you do to your Bus Today

    Hey Don just curious. Why did you remove the pure system enterprises filter? I actually found a company that supplies all new media and i just rebuilt mine. Pretty cool process as the customise the media to your water sample.

    Bill III

Page 31 of 2304