Archived
Forum Replies Created
-
I’m looking for time to visit a friend in Tenessee who will help me chase them down…. If he can stay up past 8 pm, anyway!
You need to update your signature. It is still showing some old bus.
-
That makes perfect sense. One thing I noted when I spent some time under my coach was that some of the suspension system connections are the push in type as opposed to the compression type. Over time that type connection is more likely to show a leak than the compression fittings. I am not advocating a wholesale replacement of fittings, but I would take the opportunity to squirt soapy water on them every time I am under the coach.
Also, as a coach and its components in the supension age colder weather tends to make the coach lean quicker, probably showing up leaks that were always there, but the cold making them larger.
Chasing leaks ain’t for sissies.
-
Just having it hold off a while will be nice. That way I can get everything done with one trip to the shop.
-
Bonz, since leaks in air bags and at air fittings usually do not repair themselves an intermittent leak that creates “the leans” is typically associated with a Norgren valve. In coaches with slides the system is designed to dump tag axle air when the slides are operated so we can know you exercised the three port Norgren valve and since you tipped your coach one way and then the other when in the campground we know you exercised the other two valves in the left rear where you were leaning. In other words you exercised every valve in your leveling system and if one of them was the culprit causing the leans just exercising it has corrected the problem, probably temporarily, but that could be for months or even longer, or it might act up again the next time you use the coach.
The good news is rather than trying to chase a leak that is now not a leak you can either wait until it shows up again, or buy about $300 worth of Norgren valves, replace the three for about 2 hours of labor, not worrying about which is the defective one and your bus is fixed. When the leaks are associated with the valves they are very difficult to detect.
-
hmmm… glue in the Marathon shop might be a problem as Marathons are built tough with nuts, bolts and screws.
-
never heard /didn’t get best of you? Was that one of the oil sand buses? Know another guy that got one and said it was a great coach . He was from Edmonton(sp) Alberta and into show jumpers.(horses). Good luck . By the way I built a 89 so would be able to help with info on your 87. Bob

-
I read Tom’s post from this morning, then went to take my leaner to Marathon. Lo and behold, there was no lean! The drive home must have loosened up something!
-
Not being the sharpest knife in the drawer, I could not edit my own post nor could I get the link right. But we will give it one more shot. I am leaving the link in place in case I am not successful at this on the second go around. So much for today’s lesson on computer technology and the magic of the Internet.
I want it … I want it … Magic bus
Thanks to Tom at Prevost Community for the photo credit.
http://boxcarokie.com/2012/05/07/i-want-it-i-want-it-magic-bus/
One more time: Magic Bus
http://boxcarokie.com/2012/05/07/i-want-it-i-want-it-magic-bus/
-
I suspect you are dealing with several issues. The first appears to be the chamber that lifts the tag and while replacing the diaphragm is not risky due to the low spring force (unlike an emergency brake which is dangerous), but often it is almost wiser economically to just replace the chamber. That appears to be one issue.
It is possible the three port Norgren which holds the path open between tag and drive air bags is part of the issue. At the core of the issue however is the aux air system is losing air at a rapid rate if tag air is dumped in 20 to 40 minutes, so by fixing the chamber and making sure the Norgren valve is OK those repairs are like taking an aspirin for a brain tumor. The real problem is there are likely to be aux system air leaks that have occurred over time and were ignored and now if you have an aux air gauge it is likely to be waving at you because aux air is being lost at an excessive rate.
