Forum Replies Created

Page 119 of 2304
  • Archived

    Member
    September 15, 2020 at 3:59 pm in reply to: H-3 Awning Window help

    Bernie, figured it out. Motor shaft Allen key was loose inside of window

    thank’s

  • Archived

    Member
    September 15, 2020 at 3:39 pm in reply to: anybody have 1997 or so Jenn Air fridge?

    A fork lift for refrigerator removal and replacement is the safest way not only helping avoid damage to the coach, but if you mess up your back or otherwise get hurt manhandling the refrigerator it won’t be worth it.

  • Archived

    Member
    September 15, 2020 at 3:36 pm in reply to: TSD & Love’s

    There is no doubt that right now since Love’s changed the discount they were allowing TA/Petro is where to fuel up. With a little planning fuel can be bought consistently somewhere around $1.70 to $1.80 with the discount.

    Some states are to be avoided for refueling because even with the discount they are above $20.

  • Archived

    Member
    September 15, 2020 at 3:33 pm in reply to: MARKER LIGHT PROBLEMS

    All on the same fuse. I forget the fuse number but it is in the electric compartment in the front towards the door hinge. Did you do any work recently in the compartment over the driver’s head? It is the only place I think there could be access in a Liberty.

  • Archived

    Member
    September 15, 2020 at 12:38 pm in reply to: TSD & Love’s

    I have ran these roads for years knowing exactly how far I was from the next Flying J in any direction. With this fuel card, I adjusted to knowing Love’s locations. Since Love’s changed to straight 16 cents per gallon discount through TSD, I am looking for TA and Petro locations. I saved $90 on my last Petro fill up.

    I am thankful for TSD.

    Davy

  • Archived

    Member
    September 15, 2020 at 12:30 pm in reply to: anybody have 1997 or so Jenn Air fridge?

    I replaced the evap fan motor two years ago thinking it could be the problem as when I got the coach refrigerator could not cool top of refridge section and bottom drawers were freezing. That motor tuned ccw. This year after putting in computer fans internal to move the air with limited success, I looked at the rotation again and found that the fan blade shape required the motor to turn cw. I ordered another motor of a parts website after verifying the refer model number. That motor turned ccw! I found online it is easy to reverse the shaded pole motors. Put that one in and fan blew air out the top! so far refrig is working so much better and stable.

    No idea how this refrigerator airflow was incorrect. looking at many repair video’s all the ones had motor turning ccw with the fan blade shaped to go ccw.

    I had thought you needed a forklift to get refridge thru window. will keep that in mind for the future.

  • Archived

    Member
    September 15, 2020 at 9:50 am in reply to: XL Shocks

    Amen Bernie

  • Archived

    Member
    September 15, 2020 at 8:38 am in reply to: Newbie Looking to Purchase a Prevost Coach

    Of all of the Converters which Coach has the simplest systems for a first time buyer?

  • Archived

    Member
    September 15, 2020 at 7:52 am in reply to: Newbie Looking to Purchase a Prevost Coach

    Jon:

    Based on your years of being involved with Prevost and reading the different forms, what are the specific niche’s per individual converter in your opinion?

    I chose a early 2000’s Featherlite because I felt it was the most basic electric, & mechanical systems (on the converter side) for a first time Prevost owner to learn & live with, most things I could tackle myself. We loved the Marathon interiors but didn’t like Marathons proprietary systems, meaning Marathon HAD TO be involved in repairing most things. Pretty much the same for Liberty, IMHO Liberty are the cream of the crop. Just to much to learn and live with for a first time (do most of it yourself) Prevost owner.

    Chuck

  • Archived

    Member
    September 14, 2020 at 7:24 pm in reply to: Newbie Looking to Purchase a Prevost Coach

    I think anyone looking to buy a coach can expect owners of a specific conversion to recommend that conversion. Based on years and years of reading comments on Prevost forums going all the way back to when the first one came on line in late 90’s I am of the opinion all are well build and each converter has a niche in the market.

    Today we are fortunate in that they all share the Prevost chassis so that levels the playing field significantly, and each converter may have different ways of doing things compared to the next guy, I cannot remember any single converter getting bad marks for their product.

  • Archived

    Member
    September 14, 2020 at 7:14 pm in reply to: H-3 Awning Window help

    Bernie will probably jump in here Rick, my 04 had manual sliders.

  • Archived

    Member
    September 14, 2020 at 4:53 pm in reply to: Newbie Looking to Purchase a Prevost Coach

    I’ve bought from a private individual, a dealer, and a converter (Liberty).

    All experiences were very good. The first was a private sale, the coach was so new that Prevost was still standing behind it although it did not need anything. But knowing nothing I was able to have Don Hoffman (a converter) do a pre-purchase inspection for me. I followed him every step of the way and that inspection also became my training. Lesson learned: Unless you are capable of doing your own inspection have it done by a professional who has no conflict of interest. Plan on it taking a lot of hours.

    The second was from a dealer. At the time of that purchase I had owned my first Liberty 14 years and the coach I was buying was a Liberty. I was familiar with Liberty systems, the chassis, and confident I could do my own inspection especially since the dealer was willing to allow me ot have the coach over my pit in my garage. The dealer had already gone over the coach, found some minor things to address and took care of them. I was able to do a systematic inspection in my garage and while there were no records (none of my coaches had any records) there was evidence galore of regular service, and my operation of every switch and knob and control showed everything worked as intended.

    The current coach was purchased from Liberty. It was a 2006 in 2012 so it like the two previous ones was unlikely to need things like air bag replacement, so I prepared a 4 page list of the inspection procedure I was going to follow when I picked up the coach and it was clear Liberty followed that in getting the coach ready. This coach had a lot of things new to me along with some older Liberty features so I asked for and got great assistance in inspecting and training. As an example I not only wanted to know how to operate the slides, I wanted to get into the specific procedures for opening or closing the slides when the normal process failed. It took two days of inspecting / training while we lived in it to get used to operating the systems and devices. During the inspection one Cruisair wasn’t operating up to standards (I tested temperatures), and it was replaced but apart from that, like the previous coaches the rig was trouble free.

    My XLII is the model that when bought requires a delamination inspection by Prevost. When I first learned the coach was for sale I tried to make an appointment to view it and it never happened because Liberty found issues and had it sent to Prevost for repairs. I bought it upon completion of the repairs. They were extensive and the coach required all new skins. The final cost which Prevost absorbed was around $60,000. The point is when looking at a coach make certain EVERYTHING is included.

    I have a DDEC reader, I rely on my infrared heat gun, and if I do not have the ability or records required I get the experts with the knowledge to verify what I cannot do.

    But all buyers need to be cynics. There are things that can get very expensive very fast. Delamination is one if the coach is of the model and vintage where that might be an issue. Only Prevost is equipped and capable of doing that inspection. But even if you do get all the right things done, a coach without service history records is a risk. Diesel engines with sleeved cylinders as all Prevost coaches are, require coolant maintenance. But if an owner places more value in tire shine than needed maintenance, especially that which cannot be checked, it can really get expensive. Cylinder liners that are impacted by poor coolant maintenance can suffer cavitation (porosity) and the net result is a destroyed engine.

    Similarly, if a coach has relatively new tires, but one or more than one were run at a low pressure the tire could have suffered the type of damage that causes what is called a zipper failure in which the tire failure is sudden and catastrophic. Loss of control of the coach, or personal injury just from airing up tires can happen.

    So approach any purchase with the seriousness it deserves. Regardless of they type of sale you the purchaser has to bear the responsibility for verifying the coach is in the condition you expect. This is serious business.

  • Archived

    Member
    September 14, 2020 at 3:54 pm in reply to: XL Shocks

    Fort Worth Prevost ” Yellow Magnum Monroe’s” all the way around after they found an old one leaking.

  • Archived

    Member
    September 13, 2020 at 9:27 pm in reply to: XL Shocks

    Thanks for the responses, looks as if Koni are the favourite, do you guys leave the shock settings as out of the box on install or alter the factory settings ?

  • Archived

    Member
    September 13, 2020 at 8:34 pm in reply to: Which converter do you like

    Thanks Jon,

Page 119 of 2304