Archived
Forum Replies Created
-
Archived
MemberSeptember 22, 2020 at 7:06 pm in reply to: A different look at lithium battery replacementPlease provide us a link when able.
-
I got new the lens from here I believe they have the gasket also.
-
Archived
MemberSeptember 22, 2020 at 5:46 pm in reply to: A different look at lithium battery replacementHello,
I am wondering what is the advantage of lithium batteries.. I have a 1998 Featherlight XL and after changing out my 8 4D lead acid batteries to the original 8 4D AGMs they last so long that i don’t know why I would ever change them out.
I have dry camped for 3 days this weekend and keeping my eyes on the meter, I never got near the 23.8 volts needed to auto start my generator. Lights, aquahot, tvs, fridge on, cooktop ect. It was cool so I did not need AC.
I would love to hear thoughts on this.
Thanks
David Thomas
1998 Featherlight XL
-
Archived
MemberSeptember 22, 2020 at 5:17 pm in reply to: A different look at lithium battery replacementLooking forward to reading this article. Will you have the ability to publish / share on PC?
R
-
Archived
MemberSeptember 22, 2020 at 12:50 pm in reply to: A different look at lithium battery replacementSounds interesting, Jerry. Will the article be available online somewhere? I might be a good candidate for just such an approach.
-
Chuck… This place has all the parts, including complete assemblies.
-
I bought the wire loop ones on Amazon, called “festoon”
-
Maybe youve seen this from Gil but posted just in case. It may not be relevant for H.
-
+1 on bulb replacement. By far the easier path.
-
Docking lights..
Just cruise around the LED light company offerings. Have you checked e-bay ?
AL
-
All the stars came together to help PC members understand some things that never change about tires.
Tire busters as their called have caused more problems then we can write about.
Excellent post Jon,
AL
-
The lack of concentricity that created the problem and ended up requiring the tire to be shaved to make it a true round never needed to happen.
To start with the person mounting a tire on the wheel needs to seat the bead with the wheel and tire laying in a horizontal position, and once the bead is seated just use the ring molded into the rubber of the tire near the bead to verify visually the mounted tire is centered. Those two simple actions virtually eliminate a non centered tire.
The next step isn’t so easy. But if the few minutes it takes per wheel are spent the tire is going to run true. With the wheel mounted, but before it is lowered to the floor or ground, use a dial indicator set on the ground or clamped to a fixed spot on the coach with the point or stylus making contact with the tire. Rotate the tire and wheel assembly and note the runout or deviation from concentricity. I cannot remember the allowable deviation, but for this purpose lets say the maximum allowable runout is 30″. If the runout is greater rotate the wheel to where the greatest deviation is at the top, loosen all the lug nuts and allow gravity to drop the wheel down. You may not even realize the wheel has dropped. Retighten all the lug nuts and remeasure the runout.
At Michelin this process was demonstrated and a tire and wheel assembly that had runout of about 80″ was now well within the allowable deviation from concentricity.
A mismounted new tire would feel like it was out of balance. The obvious way to deal with that would be to balance the tire. That would initially correct the problem, but not for long. It soon would again feel like it was out of balance. The bottom line is the tire was wearing into an egg shape.
With a set of tires costing thousands of dollars it just does not make any sense to have some uneducated person slap a set of tires on the coach without doing it properly and then measuring how well the mounting was done. I have seen old time tire guys dismount a tire, and mount a new one with the wheel still on the truck or bus. It is those bad practices that contribute to damaging thousands of dollars worth of tires. Be vigilant.
-
Here is the info on the Tru-Balance nuts JoSam’s put on my 365 steer & tags then they shaved the tires to get them round again. Been about 300 miles and ride is much better.
The passengers side tag was high on the outside edge all the way around (not just a high spot here and there). Might be my imagination but the coach had a slight lane wonder that has seamed to stop since the tires were trued.
Chuck
-
Archived
MemberSeptember 19, 2020 at 6:17 am in reply to: Excessive LEAN in curves while interstate driving?Dick, you are correct it was very bad . It was a Blue Bird not a Prevost and I only mention it because it did as you stated. Prevost in Nashville figured it out but could not source the part , so they sent me down the road to another shop . Man was that a slow craw. We did replace it and over the years i would always inspect it and all other structure components during service .
-
Hello,
My Featherlight has 1 25 foot ish retractable hose. It is located right below the 50 amp power cable reel. The power cable is electric. My hose i just manually pull the right length and it locks into place. A small tug and it unlocks and reels back in. I have a separate hose in my front storage bay if I want to wash the bus or other needs.
David Thomas
1998 Featherlight XL