John
Forum Replies Created
-
Chuck, just to be clear your first step is to verify what each switch does in each of it’s positions. For example if the switches are installed by Liberty you are going to have one switch that controls the road or driving position, a manual position and an automatic position.
The road position causes the coach to set its height relative to the ground and is the position the switch needs to be in while driving. The manual position is the only one that enables the other three switches which control the up and down commands for manual leveling at the front, LH and RH rear. The automatic position levels the coach and does it without any input from you.
If you have the standard Prevost level low I believe you will have a rotary knob with 4 positions, one for driving, and the other three for the front, LH and RH rear. When the rotary switch is in any of the three manuial positions a rocker switch can be used to make the selected position go up or down.
Step one, determine what you have, and step two is learn and verify what each position is and does.
In the case of the switches being the Liberty type which eliminates the rotary switch and instead uses a total of 4 rocker switches you also have to determine if the functions are enabled with the key off.
-
Greg, thanks for the input but I agree with Jon (albeit for a different reason). I’ m 74 and had my previous coach damn near crush me so I don’t get under them any more. Jon, I am in the process of running several tests to see if the coach reacts differently depending on where the switches are set. I will try to have some accurate measurements in a couple of days. Thanks for sticking with me. Intuition tells me my system is the one installed by Prevost but that is just a guess. I Will let you know what I find in a day or so.
-
My driveway rises 80 feet in about 285 feet of length. It is not the steepness of the driveway, but how gradual the transition is from the street to the upslope, and from the up slope to the level area at the top.
The only way to find out it your bus will do it is to try it. Do not be afraid to use every bit of the suspension travel and don’t forget you not only can drag at the front or rear you can drag in the center if the top transition is too sharp.
-
Our Silver 92, 500 hp has good power. As Jon said above we have had several Series 60s with Allison 4060 6 sp auto transmissions utilizing rear gear ratio 4.56. One in a 1999 XL shell w/2 after market slides, another in a 2001 XLII shell w/ 1 Prevost installed slide, and the third one in a 1999 H3-45 slide-free. Both stainless coaches weighed in just over 50,000 lbs, and the “H” , no slide, weighed just over 51,000, but had the best aero-dynamics. Out of the three 45 footers, the H3-45 had the best snapped off the line, good mid range power, and the best pulling power. It did have 5000 miles on it when we bought and sold it with 110,000. Both XLV and XLII 45 had less than 42k miles.
Our current coach, a 41,000 lbs 40 footer, 1992 8V-92 equipped with Allison HT 755, 5 speed transmission turning a 3.58 rear end. When we bought it in 2009, it had 62,000 miles on it, and currently has 9300 . It pulls the grade on I-70 heading west out of Denver at 35-38 mph in 2nd gear , and tows same car as the H did, which pulled the same hill at 35 in 3rd. Off the line, the H3-45 did better than the 2 stroke at our altitude, but at or near sea level, the 8v-92 excels.
Dental Guy, when did Prevost offer this blower gear change. We have no open bulletins
-
One will never be able to compare the D13 Volvo to a DD13 thats not going happen in a Prevost Volvo is what you have in Prevost now.
Arrow tells me the 407 Setra’s they own are by far the best on fuel with the Mercedes/Benz OM471 engine 7.8 average, it looks like a revamped DD13 to me
The OM71 with 510 hp has 2500 lbs of torque at 1100 rpm it makes I 17 from Pheonix to Flagstaff seem like a flat section of west I 10 a super quite engine for it’s size I was impressed with the OM471
-
My friend at Arrow Stage Lines in Phoenix is having a rash of engine failures with the Volvo D 13 engine in his Prevost he has replaced 3 in different buses @ less than 50,000 miles.
He says his DD 13 engines get better fuel milage in the Setra than the D13 Volvos in the Prevost he is not happy with the H-45 and the D 13 Volvo engines down time has cost him a ton of money
-
Thanks again. That was simple enough. Now I know what to ask for. I remembered those being on parts when I worked on an automotive assembly line years ago but I could not come up with a name for it.
DKO
-
Hey Flyuthere, I have yet to hear of anyone getting pulled over in a bus towing a Tahoe or Suburban and getting a ticket. I been doing the California drive thru for 10 years. Now watch me get one tomarrow on my way home:-(( and if i do I’m going to send it to you!! Hey how ya been? Come see us in the desert at MCC. Oh you can barrow my towed Tahoe.
-
Mark,
That Exploder is long gone and there ARE taxi’s in both Guerneville and Sedona, fact there are Enterprises withing close reach of both places as well. I suspect a number of others rentals and cabs are also available with a quick search.
As for a different way of towing, I doubt it, that’s cut and dry! There are other issues as well, in California you have a grand total of 65 feet available, with a 45 bus and an average tow you will find yourself over the legal length and have a better than even chance of enjoying a polite conversation with the CHP, I-10 outside of Indio is famous for this. Add 2750 to your costs for the citation and hope you have a spare driver to follow you around in your tow car, that’s the law. Aside from that California as does many other states, limits you to 55 MPH when towing anything.(truckers just love the place)
As an old Russian River Rat I ask, didn’t you find River Road to Guerneville, well, a little tight. Somewhere on that artery are signs about kingpin to rear axle, maximum 30 feet albeit that signage may be a tad closer to the ocean. Still in all, pretty place when its not flooded, great Italian food nearby!
-
Gee and here I thought only the big three had bad designs LOL
-
As long as Volvo was brought up, thought I would pass this along. Met a gent the other day who has a new Volvo Truck, a big dude with a 190 inch sleeper on the thing. It has the 500 HP Volvo, believe he said it was a D-9, it also had an automatic transmission with I believe 9 gears. It regenerates, requires DEF but the surprising part is that he claims 13.7 MPG at 65, hauling a load. Claims the engine is turning 1100 RPM in top gear at 65,I can attest that it only had two pedals, gas and brake so there must be some goings on with newer transmixers.
-
Would someone be ….
the pot.
But I have to admit that it was a pretty good piece…. Flyu2there.
-
If it can’t turn the engine fully over while starting I’d check the batteries and connections first. Could also be the starter commutator or brushes going bad.
Interestingly, I have the Powertech 20KW with similar behavior. I push preheat/prime for a few seconds then start. It will start and then die immediately regardless whether I keep the start switch pushed or not. The second start is usually successful. Once it is running there are no further issues (e.g. plenty of oil pressure).
I thought it might be checking for oil pressure too quickly but shorting the oil pressure switch did not fix the behavior. I assume it is some other over eager electronic nanny. Maybe the AC present check circuit. Since it is running fine once started I have not dug into it further.
The PowerTech manual has a good troubleshooting section
http://cdn.shopify.com/s/files/1/0062/4072/files/PTS-15-25_OPERATORS_MANUAL.pdf?78
-
The compressor takes standard R-134a fittings.
-
I am certainly not condemning the ISRI, all I am stating is that for me, the thing is not comfortable. It may well be geometry as the seat pan is not much larger than that of an average dinning room side chair. There is no thigh support for me and the arm rests are not only tiny, they are too low. I run the thing fully reclined with light bounce; I have replaced the seat foam with the highest density that I could find all to no avail. The seat is fine for a couple of hours max, then it starts to grow uncomfortable, if I didn’t know better I would say that it was designed by the same group that sells chairs to many larger chain restaurants….ok for an hour then it starts to get uncomfortable, after all they do not want you to stay all evening! If I could make one fit, I would put in a pilot seat from a 737, moves 16 ways from Sunday, has full thigh support, shoulder harness built into the seat and is comfortable, once adjusted, for 8 hours or more! I am on the hunt and will report back with results…………..