Archived
Forum Replies Created
-
Wow! We rode out a pop up storm last spring and determined we NEVER wanted to do that again. We had no time to run before the hail and wind was on us. It was scary. The hail stripped the clear coat off the roof of our bus.
After seeing this, I am even more convinced when the storm comes it is time to take shelter some where else!
DKO
-
I purchased a really nice ATC trailer that I had special ordered,it was a stacker 30 feet long,I found that it was a PITA to use-tow-deal with.I tow a Chevrolet 4 wheel drive PU truck and it has room for a golf cart for the horse shows that we go to,it is super.I had a chance to sell the trailer and I did,there will not be any more.It weighed 17,000 Lbs added to the 54,000 Lbs for the bus and that equals 71,000,fuel mileage was 4.5 or less and there were always engine codes.I really don’t think that with the rear engine installation with zero cooling air unless the fan is running that the bus is very happy towing more than 10,000 LBS.
-
Al, if you promise not to speak to Di about my post, I promise to not discuss yours with Mary Ellen.
True story……when we were at the point where Di had to bless the purchase of our current coach I knew it was a slam dunk. She did the normal oohs and aahs as she walked towards the rear, stopping to make note of things she like such as the colors, the private toilet, the stacked washer and dryer, but I told the salesman none of what she saw would necessarily do the deal, but I knew exactly what would. When she saw the rear closet with the carousel I saw her eyes pop and watched her mentally calculating how many new clothes she could buy to fill it.
So now we have a bus attached to one of her closets. Unless a bus has a closet of similar size there is no way we will be trading. If we were to ever get a trailer, I question how long it will be before that becomes a walk-in closet, and I have to find a way to hook a Roadmaster tow bar to the rear of the trailer which is hooked to the rear of the bus. When our first bus had the fire in the engine compartment and we had to leave it with Prevost Jacksonville I filled a Penske rental truck with our stuff. It was like moving out of an apartment. It took three days to clean the bus out. I had to find ways to avoid the scales on the return to home. (OK, I’m stretching it a little).
-
Larry, Yes we are going to the Prevost Proiuds rally in May. I think it would still be possible to join and get signed up, with 2 months to go. Have been to one PP rally, well organized, nice people, good support from Prevost with bus transportation provided to off site events.
The link box above will get you to web site.
Look forward to seeing you there.
-
That is a great idea, Jim. I will try that in the future when I have access to a good welder…
To my surprise the standard hitch lock did fit, but just barely.
DKO
-
Yep, those are the good one’s Les…
-
Ken, that is one of the most impressive posts I have read on the Prevost forums. Just the idea of taking on a complete engine and drive train change out is over the top. You really caught my attention with the 1400 rpm at 70 mph. I would make a “WAG” (wild ass guess) of fuel ecomony in 9 mph range, flat out.
How much boost at 1400-70 mph ?
I will look forward to meeting you on one of the upcoming rallies and seeing your bus.
Thank you for posting on this group.
AL
-
My 8V92 started leaking coolant around the liner o-rings into the air
box. It was just a matter of time until it entered the oil and
destroyed the engine. I decided to spend my time and money installing a
later model 4 stroke instead of repairing the 92 Series, I really nevercared for the 2 Strokes. I got real lucky and bought a complete wrecked
truck with a 14 liter Series 60 and an Eaton Ultrashift transmission forabout 10k. I know it’s had to believe but after I sold off every thing
that I
didn’t need I may have made a little money. That doesn’t mean it was free,
it’s took me almost a year to do this at 30 to 40 hours a week. Much
more difficult than I imagined.Here’s
a link to my slide show that covers about half of my installation (I’m
working on the complete slide show). It shows the engine cradle
modifications I had to make. The only frame or structure modifications
that were necessary is adding some height to the engine access cover, a
small notch in the rear left down tube to allow some extra clearance
for the charge air cooler and I notched the tag axle for transmission
clearance when all air was dumped from the air bags, and that
modification was difficult.http://www.youtube.com/watch?v=fybDVp_s59M
I don’t think the 6 speed Allison will fit in a Prevost before the new
design tag axle. I looked at installing the new style axle but all the
mounts to the frame are completely different. I considered building a
custom tag axle. Considering
the cost of a world transmission, the cost of building custom tag axle
and on top of that my research indicated that the 6 speed Allisons were
not reliable
past 300,000 miles and a used transmission would be all I could
afford. I decided to go with the Eaton UltraShift even before I found
the
deal on the wrecked truck. Another reason I decided to do this repower
is fuel efficiency. The automated shift, manual transmission should be
more fuel
effect than an automatic. It will be a while before I have any MPG
numbers that I trust. I can tell you at 70 MPH my RPM’s are 1400.I hope this answers most of the questions. If anything needs further explanation let me know.
Ken
-
You’ll hear from the guys with the
stackers here, my trailer is only 12′ long and used occasionally
in the past with the Harley. I like pulling the trailer because it
was easy to back up, you can fit lots of stuff in with the bike and
it became a garage for the bike when setup at the campground. -
Tom,
I got the XZA2’s.
-
Congratulations Ken…
-
Ken, there is only one word to describe what you did…….Awesome!
Just guessing here, but I imagine you had to change out the tag axle and go with the six speed transmission. That makes the effort even more complex than just dropping in a new engine.
-
The entire week revolved around Danica. Unfortunately she managed to crash everything she drove. With the exception of the horrible wreck during Sprint Cup practice she was blameless in the crashes. The photos below are of her Nationwide car before and after her teammate turned her on the 3-4 turn.


The damage doesn’t look as bad as it really was. After a little while in the pits the car was rolled back to the garage for extensive repairs.
