Archived
Forum Replies Created
-
Power Tech Generator end bearing went south distroying entire internal generator parts, Complete New Generator was the cheapest way out. diesel engine was OK . The new generator was Sold by Power Tech in Leesburg, FL and made in China, I will run it at least once a month and change the oil every 100 hours, Jon idea of using it at rest stops will be in my game plan as well.
-
Gary, for 6 something in the morning I’am half awake reading your post and positive you are drinking something else in your coffee
. That was good ……. LOL in KC.
-
Since our generators like to be run hard I try to use ours as frequently as possible. Since I admit to using the coach only to get from 50 amp to 50 amp service I can literally do without a generator, but that makes no sense because we do dry camp from time to time.
So to exercise the generator on every trip I have gotten into the habit of rolling into a rest area (for lunch or for overnight) and starting the generator as we roll to a stop. At that point I load it up as much as practical. I turn on AC units (or heaters), lights, the TV, and anything else that makes sense. If I can I use all 4 AC units either as cooling or heating to load up the generator. At 20 KW it is almost impossible to load it more than 50% for any extended period, but I try.
It may appear silly to run it for 1/2 hour while we eat a sandwich, but at least I have fired it up, exercised it, loaded it and brought it up to its normal running temperatures. By doing what we do even though not really necessary when on a trip that begins and ends with 50 amp shore power I have assured ourselves the generator is still working as intended and if there is a glitch I know about it before I spend three days dry camping and really need it. Not drawing down the batteries deeply because we run the generator also reduces the cycles on the batteries and when I replace them at 5 years they are all still good, which means we haven’t had to deal with marginal batteries. Our generator likely consumes less than 1/2 GPH, probably areound .4 GPH so the cost of operation is marginal.
I’m with George on the 100 hour service intervals.
-
So as to not copy the chrome and stainless trim employed by the King of Bling I added a few pieces of copper trim consistent with other brass and copper trim that was standard on my coach. Now my coach looks similar to a diesel powered pot of Revere Ware with the stainless top and copper bottom.
When I have days in which I should actually be doing some work but I want to avoid it I claim I am doing some work on the bus, and I spend the time listening to talk radio while polishing copper an aluminum. I have learned to be very careful when opening bay doors or engine doors so as not to injure anyone with the highly polished components found on my coach. I know exactly how you feel about your poor friend who suffered injuries from viewing the brightwork.
If any of your folks reading these two posts wish to jump in and spread a little of what Gary and I are spreading, may I ask that you bring it to Knoxville to put on my garden to help my tomatoes grow?
-
Jon, I did not know you had copper on the outside of your coach? or are you polishing the plumbing bay again, I had to stop doing the plumbing bay, one day a friend ask to see it. I proudly opened the bay door not noticeing the sun was low, well! I looked around to see my friends reaction to my shiney copper, he was on the ground! blinded by the light reflecting from shined copper, well after two months of wearing sun glasses he was released from the doctor but he never comes around any more, just can’t figure why?
-
I tow a 2006 Jeep liberty with a Diesel engine. There were
only a few of them made. I used a Blue Ox base plate with minor modifications.
In my opinion almost any vehicle can be towed using a base plate with a few modifications
using machined spacers, longer bolts and other assorted hardware. A modified
base plate mounting canl be stronger than the standard off the
shelf version offered for most applications. You will need a strong
understanding of mechanical principals and preferably the ability to calculate
the strength of your modifications. If you don’t have that skill set you will
need to hire someone able to do the modification for you. If you want too, you
can tow anything. -
I had the pleasure of removing a bunch of Sikaflex on a CC slide awhile back and that stuff is a nightmare to get off. I did learn that you better put it on correct because removing it after it’s cured is tough.
-
Spend it, before the price per gallon goes any higher. Fuel in W. Denver is running about $3.72/gal/USD
-
Congratulation on your win, you must be one of those lucky guys unlike myself.
-
Ron,
Report back to us about St Rosa, seems like a nice park and you’ll be helping them in their effort to get the word out about their new facility.
-
As you have noted, filling the void is necessary for a good job. The sealant serves a double purpose in my opinion anyway.
The glass over time tends to fog due to moisture infiltration. The sealant around the edge helps to prevent this leakage.
Glad everything went well, add one more to the fine craftsman in our society.
JIM
-
Well I have the window out and everything all cleaned up and ready to install. I found the reason it came loose. Apparently there has been some work done on the windshield post and this window as removed as part of that work. Whoever installed it put about 1/4 enough Sikaflex. There were places that the bead behind the window was less than 1/16 of an inch and there was none on the glass edges. They had then put a small bead around the outside edge of the glass. I had rather put too much and clean it up that not have enough. I will start the install in the morning.
The sharpened hack saw blade was a great tool for the clean up of the old sealant.Thanks again for all the help and info.
-
Jon,
I know a place were you can get military gun ports installed in your Hummer for additional protection against other drivers.
-
Thanks for that information. I relocated the Transmission control unit to more accessible
location and checked the connectors, they appeared to be good quality
water proof connectors, but I will recheck them.Thanks,
Ken
-
We carry our bikes with us everywhere, but there are many times a cart would be handy. I have used my truck almost everyday in the Resort for all kinds of reasons that the bikes weren’t practical. Carrying fishing gear and lawn chairs to the river is impossible on the bikes.
Using a Cricket for purposes that John has just explained is perfect.