Archived
Forum Replies Created
-
Where will you go next?
Do you still have the farm?
JIM
-
For the more ambitious among us a fan clutch replacement is about a morning’s worth of work with a few tricks to make it easier. It is heavy, you are lifting it with your arms outstretched and if you have back trouble you might consder asking your wife to lift it.
Once it is out you have the option of installing a new one, or if you are looking for a way to fill your afternoon you might consider rebuilding it. The last time I spoke to Prevost parts they indicated there was a kit for rebuilding. I did not remove my radiator and the available space was minimal but once I learned I had to remove the fan from the clutch, and lean it against the radiator (carefullly) and then remove the belt tightening bellows so the clutch mounting bracket could be tipped more towards the engine the removal and replacement was quick and easy but it sure pulled on my back muscles (at least those that remain).
-
Truk, I like the Tommy Bahama shirt your wearing
-
Thank goodness for rivets and H’s hope you get this resolved seems its a bigger problem than any one thought!
-
-
Yep, that’s it. Thanks
-
Chuck,
I’m checking out the capabilitiy to show full screen, I think that’s what you were asking correct? The pictures show up all my devices about 1/2 screen.
-
Chrome is a problem, I had to switch to Firefox that I actually like better. Chrome did an update about a month ago and after that, there was a problem. Prior to that, Chrome worked well.
-
350 to share with and learn from. Thats guys for a great resourse. Rick
-
GOT’EM, Boy it doesn’t take much to make my day! Along with my $100 fuel card from Prevost Community I’m ready to get on the road. 🙂

-
Petar,
The 24v side of the gauge stays there. The ground side
goes to ground through the sending unit.Starting at gauge, unhook the ground and the gauge
will/should read empty. Make sure you do this with the key on. Now hook a ground
lead to ground post from a good ground, the gauge should read full. If this
works there is a problem with the ground running from the gauge through the
sending unit and then to the ground.Please note: I have done this test and all passed just
fine. BUT my problem ended up being the gauge, it had a intermittent problem. I
finally just replaced the gauge and it has worked fine ever since. Took a while
to find it. -
The Picture You Seek. It’s the lower gauge. They all seem to be wired the same.
Your lucky, I was just cleaning the dust behind the dash.
JIM
