Archived
Forum Replies Created
-
Archived
MemberMay 7, 2022 at 6:03 pm in reply to: Electric Air Compressor tank for Aux Air when parkMy aux air compressor breaker switch is located where yours is, last on the left. #2 inverter powers it.
My aux compressor is in an enclosure on the back wall of the steer compartment. The air from it flows thru the water traps/separators then to the main aux tank that is nearby just outside the steer compartment.
There are 4 ways to put air into my aux system; 1) engine driven compressor; 2) fill fitting in back curbside engine compartment; 3) fill fitting inside steer compartment; 4) aux compressor. Each has at least 1 water trap/filter/separator to keep the water out.
-
Install Detroit Diesel upgrade alternator belt tensioner kit #23527060 for early 60 series like mine. Sometimes available on ebay etc for $800 or less.
-
Thank You, I really enjoy working on these Engineering Marvels.
-
Any good bearing place will have them try Granger
-
Archived
MemberMay 6, 2022 at 8:42 am in reply to: Electric Air Compressor tank for Aux Air when parkThank you, Don and Mike.
We’ll make finding and fixing the front leak a priority!
Just had the Aux air tank drained last month but, will check again.Thank you for the great and useful advice!
-
Nice Mike ,really nice ,like all your updates ,keep up the good work.
-
Call Jeff Rowe. I know that he knows where to get them or actually has some.
-
Archived
MemberMay 5, 2022 at 8:20 pm in reply to: Electric Air Compressor tank for Aux Air when parkYou don’t have an Aux air compressor built into your bus already?
-
Lubricated by hand during the rebuild.
YouTube the brakes. There are various informational Youtube videos.
Chuck
-
I use this inflator (and super happy with the way it works!): https://www.amazon.com/gp/product/B07ZHMB9BF
FWIW, I have no idea why the outer drive wheel stems are pointing inward, except maybe because they would still be accessible if the wheel was flipped for use as inner drive wheel, steer, or tag wheel. I suppose if the stem was not positioned as it is, it would not be accessible when flipped.
Honestly, all of these issues make me wish we had a factory style TPMS with sensors mounted inside the wheels.
Perhaps I can get sensors installed on the steer wheels now and wait for the rear wheel until I change those tires. Maybe I’ll just order the kit for 6 sensors (steer plus toad) for now.
-
I don’t recognize any of that?
The 5 tag axle diesel pushers I’ve owned, yr models 1995 to 2002, all had Meritor.
-
Hi there,
I’m the tire representative for Michelin that was referred to here; it sounds like you removed the offending object and it had not penetrated the casing, and that the steel belts did there job in protecting it.
In the future, the best practice is to first mark the tire where the nail is (grease pens work great), squirt the object with a soapy solution to check for tiny bubbles around the object. If you see bubbles, the object and penetrated the inner liner- inflate the tire, drive to a tire store, and get it repaired. If there are not any bubbles, and you are within driving distance of a dealer, remove the object and spray the area again. If there is a small leak, you will see bubbles, and you should get to the tire dealer, sooner versus later.
The plug kits are legally sold as TEMPORARY USE ONLY, except for lawnmower tires, lol. They are made with string and gummy rubber, and do not provide a permanent seal. If left in long term, they will lose their rubber properties and the string will act as a wick, allowing moisture into the tire and rusting the steel belts. Never leave a plug in a tire!
As for this particular tire, if you’ve removed the offending object and the tire is not leaking, and the damage is to “rubber only”, then there is not an issue leaving it in the wheel position where it is running now.
-
Greg, that is not advisable. Depending on the state of the Eprom, he could lose his program completely.
-
Take the old battery and leads to Batteries Plus
-
I’m sure he is trying to determine FMCA discount.
I am a FMCA member, so I was looking into their discount program