Prevost Community Forums

Find answers, ask questions, and connect with our
Prevost Community around the world.

  • Rod

    Member
    November 24, 2013 at 9:08 am

    From the heart here: Stay on them. I’m a dum but home builder that do my own Slide building. an sounds like I have more controll over my slide operation that they do.. My limit would be runnin on high temp!! My total cost of building my 29 lin ft of slides was under $2000… not the $2000plus dollars a lin ft you have in yours.. No where near–no where !!! the quality!!!!! I’m not the pro. From the outside….Bob says—–Prevost :::: TIME TO SHOW THE REST OF US WHAT YOUR REALLY MADE OF…quit milking the cow!…. sort of looks walmart from hear? Moderator deleate if you need. Bob

  • Archived

    Member
    November 26, 2013 at 6:36 pm

    Well I heard from Robert Hilt today he was on vacation, they have deleted the charges for work done at J-ville, and I am most appreciative Robert is a real gentleman I I hate to bother him with this but believe he can resolve the problem, he wants me to take photos of the slide going in and where it stops and I will e-mail them to him. Again I believe that Prevost and Robert especially have really tried to fix this thing but it is hard to figure out, we just have not hit on the problem just yet, between all of us we will get to the bottom of it. I am sure it will be of interest to everybody on this site, so will keep you all abreast of whats happening, thanks Gary

  • Mike

    Member
    November 26, 2013 at 7:12 pm

    Glad you got hooked up Gary.. Maybe you could take a video with your phone or camera, that way they see it in action. What you have going on is of interest to many with slides and for the most part, we don’t hear much about slide problems, so it will be interesting for everyone to learn what they determine is the cause.

  • Roger

    Member
    November 28, 2013 at 7:24 am

    Will do Tom, hope you and Nancy have a great Thanksgiving, and the same goes to all you PC guys and gals, happy to be in florida, and Riverbend, Megan and Gary

  • Archived

    Member
    November 28, 2013 at 8:09 pm

    Same to you Gary. Give Joile a pat on the head from us. Hope you get that pesky slide issue taken care of.

    We got our first snow last night, so I was out blowing it all off the driveway this AM. It is that time of year here.

  • Bob

    Member
    November 30, 2013 at 8:05 am

    Mark, Could use a little of the white stuff here, to keep things cold, Seems as the refridgerator decided to die yesterday on top of the other pesky things, called Liberty spoke with Troy told me how to remove it. Have a HVAC guy working on it that has done these before. Hope it is a capacitor or such. Major prep for it Have to cut a peice of 3/4 plywood to fit the floor configuration so you can roll it out, and very carefully remove the trim. If its shot will go to Stuart and remove windshield and put in a new one,fortunatly we have a residential fridge in the coach house, so all is not lost!, I guess just another bump in the road, On the bright side, should be good for another 10 years or so, meantime I am sitting under the palm trees with my trusty igloo smoking a cigar and drinking margaritas, Life really is good! Gary

  • Richard

    Member
    November 30, 2013 at 9:23 am

    Hope it is a simple fix, and does not require replacement, you have had enough fun for now. Have a good time down there. Maybe see you again at the fall rally.

  • Charles

    Member
    November 30, 2013 at 2:55 pm

    Gary Glad you are relaxing and enjoying yourself in Florida.

    We thought our fridge went this spring. As it turn out the fan had spun on the shaft and needed to be

    replaced. $1000 for the fan and service call was all it cost. Hope you get an easy fix. Rick

Page 2 of 2

Log in to reply.