-
Pressure Pro FX Now Available
-
Sensor must be replaced, and 5 years on battery life, yet have seen many go longer easily…
-
Tom,
Is the Pulse FX repeater available yet? Looks like about 1 year since it was last mentioned.
-
I used no extensions on my inside duals, and I use Tom’s PVC tool to install and remove with no problems. The trick though, is getting the valve stems angled in the proper position to use the tool. Once that’s done, it’s easy.
-
Tom, do u have a pic of your PVC valve tool or is it exclusive to dues payers only ?
-
John – As I mentioned in the email, no repeater yet, frustrating, but not much we can do about. They are working on it and the first units didn’t meet their specs.
Steve – Since your up to date on your dues and none of it went to Jon, the tool is a 3/4 pvc pipe with a coupler. You can see a picture on my video in Video’s of Interest.
-
One of my valve stems was angled a little off and made it difficult to remove the PP sensor. I modified the PVC device, using a carriage bolt for the long shank of the tool. It gives me a little more room to get the needed angle.
I used a little epoxy inside the cap and a star washer outside the cap to keep the carriage bolt from turning.
A few wraps of duct tape on the end helps the grip.
Log in to reply.