Prevost Community Forums

Find answers, ask questions, and connect with our
Prevost Community around the world.

  • Archived

    Member
    October 8, 2020 at 7:58 am

    The mounting is pretty simple, it comes with two L brackets that you screw to the floor then the toilet sits over the brackets and are fastened to the bowl. As Bernie pointed out, a few trim pieces may be needed on the floor.

  • Archived

    Member
    October 9, 2020 at 12:39 pm

    Thank you Bernie and Tom…

    Tested the motor with 12V power directly to the motor, no turning or even trying to turn. Gently tapped the motor, no luck.

    Motor out of commission…talked to Jeff and I decided to take the job on since getting a new Tecma Plus could take awhile.

    I ordered a new motor, new cam to replace if needed, a service kit for the vacuum breaker and flapper gasket. The other components seem to be OK.

  • Dick

    Member
    October 9, 2020 at 3:31 pm

    Dorel:

    Check out Flea market, just posted Headhunter toilets for $200. You will need a high PSI fresh water pump if you choose this route. Good toilets and price is right

    chuck

  • Dan

    Member
    October 14, 2020 at 11:33 am

    Follow up…

    Took the unit apart and cleaned, verified and cleaned all electrical components and connectors

    Replaced with new, the motor/bracket assembly, cam(aluminum), overflow assembly (1/8″ID and 3/4″ID hoses), water hook up hose and kit for the vacuum breaker.

    Bench test the motor/flapper functionality, all good, still need to adjust the flapper/seal tension against the hopper and perform leak test before reinstalling in the coach.

    Chuck, thank you for the offer, decided to go through Microphor repair option for now, did not want to do any modification to the coach if I do not have to…

Page 2 of 2

Log in to reply.