[Marshall]

Steve,

Those are some nice ramps.

[Archived]

Here is what I have to work under the Bus:

Qty (6) of these for supporting the 4 body support points, and 2 for the drive axle.

https://www.amazon.com/gp/product/B0093NBS9W/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1

Qty (1) of these for lifting the body, drive, and Steer axles

https://www.harborfreight.com/20-ton-air-over-hydraulic-jack-95553.html?_br_psugg_q=air+hydraulic+jack

Qty (1) of these for lifting the Tag axle and anywhere I need a low height jack.

https://www.amazon.com/gp/product/B00028G2F2/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1

To support the Tag axle I cut 2 pcs of 4″ x 8″ cut to 11″ long steel rectangular tubing and stand it on end.

To support the steer axle I use these:

https://www.oreillyauto.com/detail/c/power-torque-tools/tools—equipment/shop-equipment/lift-equipment/jack-stand/a656e1139b8f/power-torque-tools-6-ton-jack-stands/ptt0/pt34115?q=jack+stands&pos=2

[Glenn]

Don nice assortment, on bus 2 plates quarter inch thick,shop 2 20 ton building jacks they are adjustable and 1 quarter inch plywood to prevent moving, steel on steel don’t like ,base plates are 1.5 by 12 inch under jacks or what ever.

[AL]

Art, just to let you know I’m stealing this ramp idea from you.

Thanks

PJ