Forum Replies Created

Page 39 of 214
  • Dick

    Member
    September 13, 2020 at 10:41 pm in reply to: XL Shocks

    Don

    Thank you for the info and part numbers.

  • Dick

    Member
    September 13, 2020 at 8:25 pm in reply to: XL Shocks

    Same as Dick, Koni front, OEM rear.

  • Dick

    Member
    September 13, 2020 at 8:19 pm in reply to: Newbie Looking to Purchase a Prevost Coach

    Hi Jon,

    Absolutely 100% agree with you (and, your many exceptional Articles posted in Prevost Community) about the importance of Maintenance Records. Excellent advice!

    In our case, this is the 3rd time in just over 10-years that Olympia has resold this coach…meaning, at least three Level III services during that time from Olympia, alone. Fortunately, there were five boxes of records, manuals, drawings, etc. that also came with the coach.

    Nevertheless, we are still going to have Prevost perform a DMI, when they do the front wheel alignment…and, get Detroit Diesel and Allison Transmission Code Reader print outs for on-going Maintenance records.
    Prevost will also perform the delamination check…there might be a corner of one panel that needs re-glued (hopefully, not requiring the rivet correction?).

    We thought about holding off on purchasing until we had Prevost’s work done. – but, the coach went through a PPI with Gil, a PDI with Austin and Bobby and it really was in exceptional condition (including mechanically). The layout is perfect for us and we didn’t want to lose out on this coach.

    Olympia is going over everything from brake chambers, pads and discs; new tires, we’re having them put Centramatic Wheel Balancers on all axles and a new Pressure Pro TPMS system; (6) new Lifeline batteries, reworking water compartment; air bags and hoses checked (will also have Prevost check these and coolant level, as well), new charger; we’re putting in a new refrigerator, etc. Also, having the area from the front Entry door – throughout the cockpit reupholstered. Replacing (1) Cruisair, re-building two and Level III Service on all four. 20KW Kohler Generator has already been re-wired and serviced. New LED headlights, fog lamps, side lights and docking lights; new Entertainment Center, too. We are changing out the solid Hunter Douglas shades to Duo silhouette shades; and the cockpit blackout shades changed out to White…to refract the Florida heat away from the coach (as you’ve recommended).

    Was thinking about putting in new Inverters but, there really aren’t many dependent systems (no slides, no air doors, no Crestron/iPads, power awnings, etc.) with a Classic. So, not sure what would really be gained by changing out the (2) 2500 watt 24 Volt Heart Inverters for full Sine Inverters?

    When done, we believe this will be about as current as a Classic can be…and, the fact it has 160K miles – means it has been driven, cared for and hasn’t spent an inordinate amount of its life undergoing repairs. At least, that’s the theory we’re going with! 🙂

  • Dick

    Member
    September 13, 2020 at 4:54 pm in reply to: Newbie Looking to Purchase a Prevost Coach

    I have a lot of respect for dealers and brokers that know Prevost coaches and are willing to make the huge effort required to restore one to a very reliable condition.

    But as a buyer the ultimate responsibility lies with you to understand enough about the chassis and house systems to insure those items that might require attention will get the needed attention. The best and only way I know to do that is to insure the coach has highly detailed and complete maintenance logs or some documented ongoing maintenance program.

    It is a lot of work doing the investigation as to what a coach needs, but someone like Austin who will try very hard to deliver a great coach is going to have a very difficult time knowing if important things like fluid changes or critical parts replacements were done without those detailed records.

  • Dick

    Member
    September 13, 2020 at 4:07 pm in reply to: Newbie Looking to Purchase a Prevost Coach

    Especially if you are purchasing an older coach…it can be difficult to find a bank that will finance what they likely view as a fully-deprecated (or, 90%+) asset.

    Jon and Tom have secured a couple banks as Sponsors of the Prevost Community website that might be able to help (particularly as they understand what a Prevost’s value is vs. a typical RV).

    It seems that all new Prevost and other RV’s depreciate exceptionally fast during their first 5-years or so. The trade-off is that they are newer (parts probably more readily available) and therefore, warrantied.

    Although some folks believe they can purchase a Prevost coach for less directly from the Seller (as is)…and, while that is likely true. I am not mechanically qualified for as complex and large-scale systems as found on these busses. Therefore, purchasing through a reputable Dealer (for which we believe Olympia is the pinnacle) and having them “bring the coach back to zero ~ as new” is a great route to take – for us.

  • Dick

    Member
    September 13, 2020 at 11:04 am in reply to: NEED RADIATOR 1997 XL 45 LEMIRAGE BADLY!!! CHEAP!!

    There are shops that can recore your existing radiator. Do a google search for those closest to you.

    What you describe is not uncommon and recoring is an excellent alternative to buying a new one.

  • Dick

    Member
    September 12, 2020 at 1:00 pm in reply to: Safety While Traveling

    Dick I did carry a shotgun in the bus.

    A Beretta M2 with a 6 shot extension tube on it for a total of 9 shots.

    I also had a Charter Arms “Judge” a six shot revolver with 3″ chambers.

    Had it loaded with Winchester Defender ammo, 1 slug followed by three or so flat round copper pellets. Would be good for close range as apposed to a long gun.

    I realize a shot gun with buck shot or slugs could be very dangerous in close quarters in an RV park.

  • Dick

    Member
    September 12, 2020 at 12:52 pm in reply to: Concrete Pad Specifications

    Hey Dick, if you notice Tom’s new bus barn has two bays, one of them is for me.

  • Dick

    Member
    September 12, 2020 at 8:32 am in reply to: Newbie Looking to Purchase a Prevost Coach

    Jon, according to Bill you bought something other than a Prevost?

  • Dick

    Member
    September 12, 2020 at 12:18 am in reply to: Coach Dealer

    we bought our coach from them as well and were pleased

    bill

  • Dick

    Member
    September 11, 2020 at 9:47 pm in reply to: Newbie Looking to Purchase a Prevost Coach

    If you understand that the owners of this forum finally gave up and bought something other than a Prevost you will have all of the answers you need.

  • Dick

    Member
    September 11, 2020 at 12:52 pm in reply to: Newbie Looking to Purchase a Prevost Coach

    The coach part of the Prevost, even my 29 year old that We’ve owned for 10 years, is pretty solid, but you will have issues with any of them and be prepared to work on things as they aren’t like your house. I’m getting tired of mine or the working on it part. Wish I could find somebody close to do the upkeep on this puppy. Hope you find a good un.

  • Dick

    Member
    September 10, 2020 at 3:49 pm in reply to: Why We Own A Bus

    From the Rapid City (SD) Journal (Aug 31, 2020)

    MILLER, SD | A retired farmer was killed Sunday when a tornado blew a recreational vehicle off the highway near Miller in central South Dakota, the state Department of Public Safety said Monday.

    Dean Paul Nelson, 73, was driving an RV with a car trailer southbound on South Dakota Highway 45 when the tornado struck around 6:15 p.m. Sunday, about 13 miles north of Miller. The tornado crossed the road east to west.

    According to a news release, the tornado caused the RV and trailer to detach. The trailer flipped in the west ditch, destroying the trailer and tossing the car away. The RV came down on its roof 150 to 200 yards west of the road in a cornfield.

    ============

    Please note the article says “the RV came down on its roof“.

  • Dick

    Member
    September 10, 2020 at 3:43 pm in reply to: AGM Batteries How long last until auto start

    Things in WI are pretty good Buddy. Thanks for asking.

    So 8-4Ds provides much more power than 4-8Ds.

    I’m surprised they weigh the same.

    Hope all is well! I worry about you, Tommy, and Brady every time a hurricane heads into the Gulf.

  • Dick

    Member
    September 10, 2020 at 2:18 pm in reply to: Concrete Pad Specifications

    I think, depending on the building codes in your municipality, you’re going to have to have proper frost footings and insulation around those footings and under the slab if you want to put living space on the bus pad at some point. I went through this with the race shop in our township when I built it because we were putting a toilet in the shop and hydronic heat in the floor.

    I too was concerned about how thick to make the concrete. My contractor (also a neighbor) has been doing this for 35 years and the concrete guy (second generation I found out) he used was almost 70 years old at the time; my project was not their first rodeos. I told the CC guy how much the coach weighed. He said, “six inches with a proper base, rerod, and fiber should get the job done”. I asked “for sure?” He gave me the number of the engineer at the concrete company. I explained to the engineer who put the numbers in the computer while we talked. He confirmed what Dave the CC guy told me. I can’t remember the bag mix, but it was a little stronger than normal. I don’t recall if we talked about jacking up the coach, likely didn’t think about that at the time.

    Both CC guy Dave and the engineer said the right rock in the base and proper drainage was very important and if I wanted 7″ or 8″ they would be more than happy to accomodate me for what they felt is overkill.

    The outside pad is now a little over six years old and it has held up very, very well. If you are really concerned … call the concrete supplier and talk to their engineer.

    Dan (and anyone building a bus barn where it might get cold): I can’t recommend infloor hydronic heating strongly enough. Its more expensive to install than a FWA furnace and might not recover as quickly, but it certainly is very nice. Quiet, almost silent. Floor is always warm, no condensation on a cold floor in the winter, late winter, spring, and early summer when you option the door. Cost to heat appears to be very reasonable. The condensing boiler appears to be very efficient. My plumber saved me $500 by getting me a boiler than had been damaged (back panel that goes against the wall dented) in transit.

    55*F in the race shop with a heavy shirt under the race cars on the floor is very comfortable while I’m working. 60*F is tee-shirt and shorts comfortable. Did I mention that tools picked up off the floor are not ice cold?

    I’m envious of anyone who has zoning that will allow for a bus barn. Someday.

    I went with saw cutting the expansion joints in the shop floor for both the race shop, bus pad, and the driveway immediately adjacent to both. After I started to use both and the driveway, I realized I should have “planned” where to have the saw cuts to use as a visual reference where to align the bus when backing in or where to position the race cars when dropping them from the trailer to get them in the middle of their work areas (I did paint red squares where the four tires of each car goes) and where the race trailer should be aligned to properly load and unload the cars (driveway is not perpendicular to the race shop which makes it a challenge).

    Its the little things that make this stuff “really nice”.

Page 39 of 214