Archived
Forum Replies Created
-
Hey Don sometimes all you need and want is spectator support.
-
Hummm:
It is not getting cold and cycling off and on. Sounds like I may have multiple issues.
Chuck
-
I’ve had excellent service and pricing from Shannon on our Prevost.
Shannon Morehouse
Brandon Bystol-Allstate Agency
W164N11271 Squire Drive
Germantown, Wisconsin 53022
Boat, Yacht, Aircraft, Motorhome Expert
262-253-4600 -
Not done to the Coach but *for* the Coach to plug in and stay happy
Talon 50 / 30 / 20 Panel with Siemens breakers
-
Tom,
What is the $1000 check for I send to Jon every year?
I was told it is the yearly dues?
-
Was under the coach today replacing a leaking front air suspension fitting. Had to dump the front air bags before removing the fitting. Looked up at the upper A arm and a picture is worth a thousand words (see attached pictures).
In normal ride height A arm/bushing sits at a 90 deg angle to the mounting pin/bar. As you can see from the attached pictures the arm/bushing on the upper A arm is twisted when the suspension is in the down position. Close up shows back side of bushing tearing a little.
I knew I always stored my coach in the normal ride height position because the general consensus was to do so. Now I know why.
Chuck
P.S. The A arms are only 1 1/2 years old.
-
Thanks again Jessica!
I will email you on the other post, where the title dropped off and the same thing happened. Do I use the “contact” link?
-
A lot of us have removed the relay in the rear electric box so the Jake or retarder will not activate the brake lights.
It is very annoying to folks we pass to pull back into the lane, and when we let off the gas the Jake or retarder kicks back in to slow us to the cruise control speed which in turn makes the people we passed think we are applying the brakes. It especially pisses them off if we do not allow ample room before pulling in.
I have to look at my coach to remember the relay number, but it is listed on the diagram that lists breakers, relays and terminals.
-
Hi Jessica-
I believe my original title was:
NAPA Group 31 batteries Bad Batch?
-
The brake lights on my ’88 did not come on when the Jake engaged and I don’t believe they do on my ’98 either. I see others posting similar era coaches do. I always have my Jake engaged on high and was given that suggestion by a mechanic who had been working on Detroit’s most of his career.
Anyone have a reason why you would not want to do this? I get the retarder settings (transmission) needing to be changed but why not stick to High Jake any time you are driving? I do occassionally change to Low Jake on a long, not so steep, grade but only rarely.
-
Bernie and Tom, thanks for the ideas. I will look into both.
Merry Christmas!
-
Won’t hurt them, they’ll pretty much take whatever you through at them. The charge voltage for 0 degrees is 15.7 for absorption and 14.7 for float.
-
Tom! What do you think charging Lifeline AGM batteries at 14.7v in cold weather on Absorb charging??
-
I Hope it wasn’t deleted on purpose. This is a Huge problem I had on the POG site. At some point around May I was Blocked from posting anything over there.
-
After changing the 3 mini airbags for the belt tensioning system, I changed the check valve for that system too.