-
Windshield washer nozzle
I need to replace both nozzles. Has anyone done that on an H and how did you get to the back nut on the driver’s side. I have access (and I am generous with that term) to the passenger side, but do not see getting to it on the driver’s side.
Any help is appreciated before I tear everything apart.
thanks
Alex
-
2 Replies
-
Alex: I replaced mine on a 2000 H3, lots of fun “NOT”.
Passengers side not to bad, but drivers side not so much fun. Plastic trim around the base of the steering wheel has to be removed, then you have to put your arm through the Y shape steering wheel support to reach the nut. The space is small and the metal edges are sharp (ask me how I know). Band-Aids should probably be part of your tool box for this project.
Your next challenge will be putting a wrench on the nut and turning it without dropping the darn wrench. It is doable but a pain the A..
Chuck
2000 Featherlite H3-45
2024 Jeep Grand Cherokee
Leesburg, FL -
Thanks Chuck. It is tomorrow’s project
Alex
Log in to reply.