-
windshield washer access
I have a leak behind the washer nozzle on the bulkhead. The line where it slides onto the back of the nozzle is probably the culprit.
1) What is the access?
2) Can the nozzle be unscrewed from the outside without losing the reconnection?
-
6 Replies
-
Dan, I had a leak like you describe, driver’s side, on a previous coach and I was able to get at it by reaching under the dash as I recall. That was about 20 years ago so my mind may be playing tricks.
-
I replaced mine about a year ago. As Jon said it requires access from the inside, they can not be replaced from the outside. they can be accessed under the dash.
It will require a helper. one to hold the nozzle inside against the sheet metal and one to start the nut on the outside.
Check your line size, my 93 had a kit to go to a larger tee and line size between the two nozzles.
-
I had hose come off on passenger side took access panel off inside and cut hose a little bit so it wood fit good , did not have to take off nut the hose came off
-
I did exactly what Peter did … I could access both sides of mine from the same opening…very close to the middle close to the floor my panel just pulled off, it was very tight getting my hand in there and then snipping the end off the line but I managed !!
Cheers, Diane
-
Good job Diane , I got the plug thanks so much where do I send money it’s great that you took the time to do that thank you so very much hope one day I can help you guys out!!!!!
-
Peter…
No charge my friend… happy to do it… we will meet one day soon I hope. You have helped me many times in the past with your input here on PC… thank you Peter !!
Cheers, Diane
Log in to reply.