-
Vantare rope lights
What voltage is the rope lighting? 110 VAC, 12 VDC or 24 VDC?
-
7 Replies
-
On my Marathon, all accent lighting is 12/24v. No 120v.
-
Rather than guess (because it could be dangerous) put a voltmeter on them to verify.
-
Keith, I have not had to work on mine, but my electrical drawings show them all on my AC drawing and not on the DC drawing, ergo, I would strongly suspect that they are 120 VAC.
If it is imperative that you be certain, I will go out and put a meter on one set that is easy to get to, will also check AC and DC circuit breakers to doubly make sure.
Let me know if you need more.
-
Jon, I don’t have one to put a meter on. I figured Fred or someone else would know the answer.
-
Not sure why you have to put a multi-meter on them, I just popped the D/C breaker in my D/C panel to determine they are on the D/C circuit, not the A/C circuit.
But again, this is for my Marathon, and maybe Featherlite’s are set-up different.
-
MKeith……..While a lot of the information on this site is accurate remember what Reagan said: “Trust but verify”.
Our conversions share a whole lot of features but they are evolving designs and all converters are making changes all the time. What might be true of one coach can be completely different on the next one produced.
-
Rope lighting (under cabinet countertops, in ceiling) in a Featherlite is 110vac
Log in to reply.