Prevost Community Forums

Find answers, ask questions, and connect with our
Prevost Community around the world.

  • AL

    Member
    November 19, 2014 at 12:46 am

    Dan…

    I had a copy of that bulletin before we purchased the suburban… there is a technique to the key part… you hold the key button on WITHOUT your foot on the brake pedal for a few seconds and it brings up your info after you reconnect the battery otherwise you have to pull the fuse and put it back in to reset it… can’t remember the sequence exactly.It did not need to be towed to the dealer… it happened to us to and we pulled the fuse and it reset it… they are working on a proper fix but in the meantime it works just fine. All my settings are being saved with the 9 volt memory saver that I plug in which is great and it will last for a week at a time or longer.

    We towed it to M&G 10 days ago and had the tow brakes installed… they are great folks there…we were very impressed and we are thrilled with our suburban…. just wish we could take off somewhere but have to wait until next month.

    I will add a picture if I can but have to change the compatibility mode to do that… let’s see if it works.

    Cheers, Diane

  • Larry & Diane

    Member
    November 19, 2014 at 12:48 am

    Would not let me do it without changing settings and I didn’t want to retype the whole thing again !!

    Above picture shows the M&G under the license plate and Blue Ox on both sides…..hard to get details with black on black !!

  • Archived

    Member
    November 19, 2014 at 7:29 am

    It just doesn’t get any better than that, PC plate and all…

  • Archived

    Member
    November 19, 2014 at 8:40 am

    Hmm. Texas car with a PC front Plate. Must be an attorney’s car! Yes, in Texas TXDOT still requires both front and rear plates.. Got to keep those convicts employed!

    Looks great Larry and Diane!

  • Larry & Diane

    Member
    November 19, 2014 at 10:18 pm

    Hey Tom & Bill,

    No front tag required for dealers !!

    Diane

  • Peter

    Member
    November 20, 2014 at 7:29 pm

    Very sharp rig! It’ll look great behind your coach!

  • Michael

    Member
    November 20, 2014 at 7:58 pm

    Great looking Diane. Where is the plate frame from ?

  • Archived

    Member
    November 20, 2014 at 8:25 pm

    Thanks you Chris !!

    George and Becky.. I found it on Ebay about a year ago probably still on there. If I find my old link I will send it to you.

    Diane

  • Dick

    Member
    November 21, 2014 at 11:03 am
  • Archived

    Member
    November 21, 2014 at 11:21 am

    You’d expect the converters to provide a half dozen of them in the coach upon delivery complementary or to bonafide subsequent owners CNC machined out of billet aluminum or stainless steel!

Page 3 of 3

Log in to reply.