Prevost Community Forums

Find answers, ask questions, and connect with our
Prevost Community around the world.

  • Sway Control Bar

    Posted by Davy on July 5, 2012 at 8:06 pm

    The Featherlite trailer that I am pulling came with a Draw Tite sway control bar for each side of the tongue. I have not been using them because my 20K insert did not have the corresponding attachment. I had this hitch put back which is also rated for 20K.

    I needed a little extra height so I put it on before I left Oklahoma Monday. (I know it does not look good but I will take care of that later.) It only has a ball for one sway control bar and I hooked it up as well.

    After about 590 miles over two days everything seemed to be working well. I really did not think I needed it but the trailer handled real well in some stiff crosswinds.

    I put it back on for travel today. We went through 3 or 4 storm cells so I was glad for any help I could get with all the wind that was blowing. When we stopped for the day I heard a terrible noise. It sounded like a thump, thump, thump and a grinding all together. It was bad and sounded like it was in a front wheel. My daughter who rides about half way back in the bus was sure it was coming from the back.

    After I checked in the park I had my wife pull up and it was obviously coming from the hitch. It was a horrible sound. To eliminate one thing at a time I loosened the sway control and the sound was gone completely..

    Any ideas? Did I have it too tight? Is there any possibility that I damaged the trailer or the bus?

    Thanks,

    DKO

    Davy replied 14 years, 4 months ago 1 Member · 0 Replies
  • 0 Replies

Sorry, there were no replies found.

Log in to reply.