[Archived]

Contact Mile Circo who is on the POG site.

Miles bought all the stuff at the CC auction in Oregon.

E-mail: mcirco@hughes.net

Here is a link to a site that has all the stuff.

I will get you a part no. by morning when I look at some of the parts I have in my coach.

http://www.devicetec.net/pushbutton.html

[Archived]

When I had my CC, you could not replace a bulb, the entire switch assembly had to be changed.

Buddy or George?

[Archived]

The LED bulb (cartridge Base) and houseing are replaceable. I have a box of them.

The part number for the LED part is KH-W378XX1A.

When you grab the button and pull straight out it will come out of the socket, then you can remove the white LED light cartridge by holding the button face and pry the LED out with a little force. (snaps out) When you take it out note the position on the bottom of the led because it is 3 pronged and will have to go back in the base in the same direction. (will only go one way) Be careful not to lose the label that is printed on a piece of paper that is in the button. Put in a new LED and and snap the button back in the houseing and push in till it snaps in place.

I have some of these I will send you if you send me an email addres

[joel]

Thanks to all for the help in finding replacement bulbs for my sunmullon switchs.A great group here. A special thanks to charles brown. thankYou………Steve

---

1999 XLV X-6872,  liberty #440