[Archived]

The photo is not coming through. However, I may have addressed the same issue. Our 2006 Prevost XLII has the small dowlight at the entryway. The light used was originally designed as a Ford truck bed light. I removed the incandessant build and secured an LED light panel inside the lense of the original light. I then connected the 12 volt leads from the panel to the power cables for the original light and the result is a very bright, white light within the original housing.

[Archived]

Hey BTom,

That light is a cargo light from a Chevy/GMC 1988-1993 truck. The LMC Truck part# is 37-4324. The new lens is much clearer than the ones that have been on my bus for 14 years… I have also seen the LED bulbs put in these new lens and they are pretty bright..

Steve

[Archived]

Could this be the light ? PERKO marine part number 0965DPOCHR

PERKO Horizontal Mount Stern Light, 2-3/8″ Outside Diameter x 1-5/8″H

Ichanged out the bulb to LED. Perko was the original light, screw holes line up.

[Dick]

Thanks, Guys…

Yes, that is what it looks like. I think I will take it off and go with the idea of a brighter LED replacement…that sounds like the most conservative plan. I didn’t really like the idea of some huge big fixture hanging there…but I did want more light.

I give that a whirl!!!ty

[Archived]

Sorry about that BTom,

I don’t know what made me think you had an XL…. I guess I should have read a little closer!!

Steve

[Dorel]

Thanks Al, coach looking pretty good, ordered fixture from boatersland, what LED u ordered, part number please/supplier?

[Archived]

Festoon bulb # DE-3175 LED …. 4 LED bulbs in cool white. Also available in natural white.

Available from ;

http://www.superbrightleds.com