Prevost Community Forums

Find answers, ask questions, and connect with our
Prevost Community around the world.

  • Archived

    Member
    October 29, 2017 at 5:02 pm

    Tim,

    On our coach, we only have the bathroom pocket door operated by air.

    There is a panel(box) that comes off from inside the bathroom up near the ceiling

    where the piston is. The regulator is behind a panel in the closet next to the bath room.

    The regulator for the bed lift is there too.

  • Archived

    Member
    October 29, 2017 at 5:32 pm

    John,

    Our regulator for our air bed and bathroom pocket door are underneath a closet. But I was thinking there would be some type of connection at the actual pocket door, maybe in the overhead channel that the door rides on. There has to be a connection somewhere near the door, but I just can’t find it.

  • Davy

    Member
    October 29, 2017 at 6:58 pm

    Tim,

    Have you removed the panel at the top of the door on the toilet side? Three screws, the panel comes off, and you can see the activation cylinder.

  • Archived

    Member
    October 29, 2017 at 7:02 pm

    Tim,

    Remove the screws in the trim on top of the door and you can access the cylinder and air lines. I’ve checked all of mine for leaks and found none in the overhead.

  • Dick

    Member
    October 29, 2017 at 7:03 pm

    Hmm … You have a pic? I don’t see any screws above the pocket door.

    Are you talking about the small screws that are holding the channel in that guides the door?

  • Andre

    Member
    October 29, 2017 at 7:19 pm

    Got it Tom … Thanks!

    Got access. I have a “Mac” valve there (pic is up-side-down), but none of the connections look to be leaking. The hunt goes on …

  • Harry

    Member
    October 30, 2017 at 12:56 pm

    I noticed that the Mac valve has a muffler

Log in to reply.