-
Need help level low switch
As many know I’m rebuilding a salvage shell. I have the rotary switch level low select – no face plate to tell which position is which. I know I can do trial and error. But can anyone give me a quick hint? there is a metal strip on one side. Bob
-
4 Replies
-
Bob mine is a “91 with a rotor knob, pointing to the rear is the drive position, left is left and right is right side and to the front is front air bags. Greg
-
I have a 98 and mine is just like Greg’s
-
Question is mine is laying loose. not mounted with no top on it just switch. Pannel it mounts to is missing. knob is there and switch,–no cover plate. I can set positions and see which one lets operates in drive mode and go from there. Bob
-
Whatever switch position energizes the center solenoid valve is the drive position. Just hook your volt meter to that valve’s input and when you see 24 volts the switch is in the drive position and all other positions are then as described above.
Log in to reply.