Prevost Community Forums

Find answers, ask questions, and connect with our
Prevost Community around the world.

  • Looking for replacement rear bumper cover

    Posted by Tom on March 12, 2012 at 12:10 pm

    The rear bumper cover on my H3-40 VIP is not in good shape and I would like to replace it. I had seen a catalog online for Expar that sold it for $525, but they no longer have them, lost their supplier. Prevost wants $1009.00 for a plastic bumper cover so I would love to find it cheaper. Anyone know of a possible source? I like to buy from Prevost but not sure about this one.

    Thanks,

    Kenton replied 14 years, 5 months ago 7 Members · 9 Replies
  • 9 Replies
  • Tom

    Member
    March 12, 2012 at 1:13 pm

    Tom,

    Can’t it be removed and repaired cheaper? A little fiberglass, some mesh and bondo plus new paint ought to have it looking like new.

  • Rodger

    Member
    March 12, 2012 at 1:52 pm

    Hi Jon,

    You may be right. It is split in a two places so if I could get it patched that might be the way to go.

    Thanks,

  • Archived

    Member
    March 12, 2012 at 2:08 pm

    Tom,

    I’m shooting from the lip here so verify this. The Prevost shop manuals which are available for your specific coach on-line from here : http://prevostparts.volvo.com/technicalpublications/en/manuel.asp may even have information as to how to make repairs to components like the bumper cover. It may take a little digging on your part, but if the cover can be repaired my guess is Prevost will outline the procedure and materials required.

  • Tom

    Member
    March 12, 2012 at 5:22 pm

    Tom,

    I might suggest you check with companies who re-fit coach wil more modern front and rear ends. When we need the center part of our front bumper to an H3-45 we owned, Bill Jensen got me on contact with Doug Stoffel with Excaliber Coach in Florida. They were in the middle of refacing a coach, and we got the used part we needed. Then we took it over to our local body shop for paint, and then we installed it.

  • Bob

    Member
    March 12, 2012 at 5:23 pm

    It cost us $4000

  • Larry & Diane

    Member
    March 13, 2012 at 7:11 am

    Jon,

    I do have the service manual and it does show how to make fiberglass repairs so that would be a help. I have had trouble with the online manuals since they start at year 2000. Is there a way to pull up the older ones? I had to buy the book copy because Prevost told me that did not have mine electronic. I will investigate the repair.

    Jim,

    Thanks for the tip. If the repair does not pan out I may look into that option.

    Thanks to all!!!

  • Archived

    Member
    March 13, 2012 at 7:18 am

    Tom,

    I have poked around various shop manuals on line to try to give accurate answers but I cannot say what manuals are available and what ones are not.

    I do know I have pulled up pneumatic and electrical diagrams for coaches built back in the 80’s, but the quality of the drawings is not up to the current standards but the drawings are there. As to the manuals I don’t know which are or are not available. Give me the pertinent poop on yours, coach type, serial number (last 4 digits plus the year designation letter or number) and I will see if I can pull up a service manual.

    Mine is a 96 chassis and my service manual is on line. But I carry a hard copy in the coach.

  • Archived

    Member
    March 13, 2012 at 8:04 am

    Tom,I had Richard at R&M Fiberglass in Turner Or do mine it was less than 200 bucks 3 year ago

    Clifford

  • Kenton

    Member
    March 13, 2012 at 11:47 am

    Thanks Clifford.

Log in to reply.