Prevost Community Forums

Find answers, ask questions, and connect with our
Prevost Community around the world.

  • Craig

    Member
    August 19, 2019 at 9:21 am

    Finditparts.com sells the Dorman Handles, #s 760-5201, & 2, 3, 4, 5, 6, for no more than $41ea if we can figure out which pt# fits the XL door.
    Maybe one of these will work? When you click on them a picture of the backside is available.

    Finditparts link

  • Roger

    Member
    August 19, 2019 at 9:37 am

    Yes I see all the different ones and most say driver side or passenger side looking at the back they look the same. They look like XL handles not XL2 handles

    I ordered a Dorman a 1995 Freightliner passenger door handle $37 bucks looks just like XL handle, we will see.

  • Archived

    Member
    August 19, 2019 at 5:26 pm

    Got panel off can’t see how to put on an emergency cable? it needs to pull down to connect to latch device here is the one I think will work Don found the Dorman 760-5206 for $24 bucks cross our fingers right side for a 95- 96 fright liner

  • Dorel

    Member
    August 19, 2019 at 7:24 pm

    Amazon sells the Dorman 760-5206 handle for $235 + tax, free shipping for me(Prime member)

    Hope it works? If not I’ll send it back. My current original? door handle works just fine so I haven’t been in there to mess with it.

    Being a pilot for a jillion yrs taught me to: “Hope for the best, but prepare for the worst”, so I’ll have a spare handy.

  • Archived

    Member
    August 19, 2019 at 10:02 pm

    Don just don’t forget doing an emergency landing to open the door and lock it !

  • Archived

    Member
    August 19, 2019 at 11:10 pm

    dead bolt would not open puled door panel back enough to get top screws out of panel that covers dead bolt got it open put piece of metal on so it can not hang again I hope

  • Doug

    Member
    August 20, 2019 at 6:40 pm

    On the XL’s I ordered new handle from Amazon, But I wanted to also install cord to open door from outside and door panel access, looking at door latch it needs to pull downwards to open so I fixed the door panel so I could access lock from inside coach , so outside I install a short cord in the door landing light, So all I have to do is remove the 2 screws in the doorlanding pull light out and end of cord is inside behind light. I had to drill 2 holes, 1st thru 1 layer of inside door frame 2nd in plastic light housing. tested it pull cord door opens. The only thing I have to do is extend bolt to attach eyelet for end of cord

  • George

    Member
    August 21, 2019 at 9:24 am

    Dan what happened to your deadbolt ?

  • Andre

    Member
    August 21, 2019 at 7:59 pm

    Is the door handle different for an 04-07 H3 45 than an XLII? Excuse the stupid question, but inquiring minds want to know. Thank you.

    Reese

Page 4 of 4

Log in to reply.