-
Liberty H345 model year 2000 DASH
The generator temperture guage that is a Liberty add on is not working. It is near the bottom right edge of the dash right next to the generator battery voltage gauge. The volt guage works, the temp guage does not.
How hard is it to remove the face of the dash to get to the back of these two guages that Liberty added? Looks like there are only 2 screws on the top edge of the dash. I can not get to the gauges from the bottom, it is all steel below the edge of the dash where the gauges are.
Any gotchaes that I need to be aware of before I start tearing into the back of the dash?
Thanks
-
2 Replies
-
I had a few sending units fail on my 08 so it might not be the gauge.
-
Jack,
Thanks, you were right, it was the sending unit. Gauge is working now. Easy fix.
Got the prts from:
Westberg Manufacturing Inc.
1827 Clay St Ste 200
Napa, CA 94559
Light for guage Part # 186-12
$40 USD
2
$80 USD
Temp sender Part # 399S7
$35.90 USD
1
$35.90 USD
Log in to reply.