-
Liberty electrical connector
I am replacing the Head Hunter tank sensor and I need to do some wiring and want to keep it as close to the way that Liberty did it,what is this connector called?
-
6 Replies
-
Isn’t that a Molex type connector? Seems to me that I have heard them called that….?
-
Your right. I think you can get most any shape and size at an electronich place or maybe some at Radio Shack.
You will have to get the crimping tool and pin removal tool to get the pins made up and the tool to take them in and out of the connector.
Liberty might give you some or sell them to you.
-
Stand by Jack, Jeff will see this…
-
Try http://www.waytekwire.com , I have used them a number of times.
-
Jack,
I used an internet search to find terminals for a project. I think what is critical is not necessarily matching the exact set of terminals or connectors but to have the connectors for a particular function the same type. I would cut the one installed by Liberty off if needed and install a different one, but one that functions as needed.
-
This looks like it may be what you have http://www.waytekwire.com/item/38609/CONNECTOR-PLUG-MLX-9-CONTACTS/
Log in to reply.