-
Liberty electric shade
I have a shade that after raising the motor wants to keep running. While picking the coach up at Liberty I had one do this and they just reset the limits but I didnt see how he did it. Do any of you know how its done? This is one of the house shades.
Thanks
-
2 Replies
-
Dean,
I just had to do another restring here at Port Charlotte. You have to remove the shade to get to the limit switch. Liberty may have a trick to do it in place, but I sure haven’t found a way. I place it on a table near the rear of the bus and use the 24v from the jump lug for power. You have to measure the blind open and closed and then get to that measurement by adusting.
There may be an easier way, but I haven’t found it.
-
Thanks Tom. I may give Liberty a call and check with them. I thought the guy told me that all you needed was a screwdriver but then again I wasn’t there when he did it. I’ll post what I find out.
Log in to reply.