-
Koni Shocks
My front Koni’s finally showed up looking at directions still not sure on how to adjust shocks on soft and it came with rubbers but no washers, How do I adjust shocks and use old steel insert and washers? Can you fill it click and do you have to remove to re adjust if needed? Koni part# 90-257SP1
-
4 Replies
-
In the lower corner of Chassic page is a counter, go to the second thread where there are about 16 posts on plus and minus of Koni’s.
I’am all for Koni, especially on the steer axle. I believe the Koni’s will have an positive effect on long lasting front end parts and tire wear.
You’re posting was exactly where I ended up after trying all 5 of the adjustment choices.
-
Hi Al,
These are Koni 90 Series shocks are they not? The one’s I took off my H3 in favor of the stock Prevost shocks were. These shocks are continuously adjustable. If you don’t mind, which flavor are you running that only have 5 adjustment positions?
Good Luck in your H3 search. You won’t be dissappointed! 🙂
-
Put Prevost shocks on the rear, the price is right and it makes a difference.
-
Ditto….. on Tom’s suggestion for rear shocks. But by all means do Koni’s on steer.
I had some extra cash so I put them on drive axle. I believe and it may all be in my head but the recovery from road dips was an improvement to passenger ride quality. Again on soft setting out of the box.
Log in to reply.