-
IDLER PULLEYS
Our coaches use a number of idler pulleys for the various fan belt drives. On each of our Series 60 coaches there are only two pulleys that drive the accessories. The water pump pulley and the harmonic balancer pulley drive all belts. All the other pulleys are either on the driven devices such as alternators or A/C compressors or they are idler pulleys.
I was reminded in a conversation with one of our members they need to be checked routinely. I may or may not have mentioned them in the seminars. As part of my routine maintenance service and pre-trip inspection I relax the belts and spin each device and idler pulley. Any unusual noise such as a growling sound, or a rough feeling when the pulley is rotated or resistance to turning is a sign a bearing may be failing.
When a bearing fails on most idler pulleys it is likely it will go from a slight noise, drag or unusual rough rotation to total failure very quickly. Depending on the accessory being driven the failed or failing bearing can either disable the coach, or at the very least take a system off line. The cooling fan drive is a critical part of the coach and special attention should be given to that part of the belt drives.
The pulley bearings are usually readily available from Prevost or a local bearing supply house. They tend to be generic and the number on the existing bearing can usually be cross referenced or used to identify the needed replacement. They are typically press fit and repair or replacement is somewhat easy and if you don’t prefer to do the repair yourself most local garages that service trucks or large RVs can handle the repair.
Sorry, there were no replies found.
Log in to reply.