[Peter]

Should be two big bolts on front off bumper undo those should fold down then

[Mike]

Should be two big bolts on front off bumper undo those should fold down then or there maybe pull handle in steering bay to pull then it will fold down need pic of front bumper to know for sure to see if you have the two big bolts there

[Archived]

Marius,

I just realized from the photos you have a very special Liberty that is clearly unlike the typical Liberty. Not a criticism, but something you should be very much aware of when seeking advice.

When a person says Liberty or Marathon or Country Coach or Millennium those of us familiar with the different converters form a mental image of the layout, systems, and locations of various devices. Those of us who will answer your questions need to be reminded of your particular layout. I’m guessing that was the Randy Travis bus and because of the side entry door it is probable locations of things like your AC units are not going to be standard.

[Marius]

open up the service bay. There is probably a green handle – pull on that and your bumper will flip down.

[Archived]

I looked- no handle in the service bay…..maybe I need to remove the 2 big bolts upfront before it flips down ?

[Dick]

Here is a look at my front bumper in the down position.

[Dean]

The XL front bumper is held with the 1 1/2″ bolts on a Liberty.

[Bernie]

Eric:

Love the train whistle

[Dick]

Thanks Fred – it’s my kids favorite thing to play with
when we drive through tunnels.

[Corey]

My front bumper is lowered and raised by air actuated cylinders. In service bay under driver is a brass 4 way air valve.