Prevost Community Forums

Find answers, ask questions, and connect with our
Prevost Community around the world.

  • Fan drive belts

    Posted by LARRY on January 12, 2024 at 1:55 pm

    2002 XLII.

    Have individual belts on the fan drive.

    Part prevost 506990. DAYCO AX74

    I have purchased two sets of 3 and can not get equal length.

    Does any body have the part number for the 3 V-belts as one.

    Alex replied 2 years, 5 months ago 7 Members · 7 Replies
  • 7 Replies
  • DON

    Member
    January 12, 2024 at 5:43 pm

    3/A74 on Amazon for about 36 bucks.

  • Jerry

    Member
    January 12, 2024 at 6:01 pm

    3-in-1 banded cogged v-belt # AX74/03 for crankshaft pulley to 90* gearbox.

    To drive the OTR compressor 2-in-1 banded cogged v-belt # BX97/02

    Both purchased from:

    https://www.vbeltguys.com/

  • Alex

    Member
    February 2, 2024 at 12:50 pm

    Do these belts (especially the triple) have enough flexibility to get between the trailer hitch and the crankshaft pulley?

  • Bill

    Member
    February 2, 2024 at 2:19 pm

    yes

  • Mike, 92 Country Coach

    Member
    February 3, 2024 at 7:24 am

    What he said! ^^^^

  • Art

    Member
    March 29, 2024 at 7:23 pm

    I should have checked this posting (and checked my belts) before leaving today. 50 miles into our trip I had the coolant temp shoot up and got the red stop engine light. Turns out the 3 belts tossed off and only two were still lying around. I managed to find a NAPA close but had to go with 3 x A73 belts, which took a little bit of finesse to get on. I now have two of the banded belts on order.

  • DON

    Member
    March 29, 2024 at 7:42 pm

    Have PSI set at 50PSI for belts ?

Log in to reply.