-
Detroit ddec pro driver
Just picked up a 2nd Detroit diesel pro driver unit. It comes with a 6″ pigtail to a 14 pin connector which 7 pins are used. Wondering where this plugs in to get working ? This Is for a 93xl Liberty. I can’t imagine it’s the j1708 below the driver bay but it’s possible – if that is the case – then I need a 14pin adapter to that. But figure there must be some other connector somewhere that this connects to. Any help would be appreciate.
-
7 Replies
-
Yep, pretty sure that’s it and if so you would need an adapter.
-
Any idea why I have no power to the Detroit Diesel display ? It worked prior to changing batteries . Is it fused linked ?
-
Is it possible someone left off a wire.
-
Any idea why I have no power to the Detroit Diesel display ? It worked prior to changing batteries . Is it fused linked ?
-
Reset the breaker on the vertical panel above the engine start batteries. Red button. Inside pass side engine door. Hope this helps. Darrell
-
Paul, all wires are on . Need to check the Breakers , thank you
-
If the breakers in question are the ones located next to the 12v and 24v cutoff then they are all good . Were these the breakers suggested Paul or are there others ?
Log in to reply.