Prevost Community Forums

Find answers, ask questions, and connect with our
Prevost Community around the world.

  • Mike, 92 Country Coach

    Member
    April 27, 2023 at 11:18 pm

    Got the radiator tanks removed, guts cleaned, then reassembled at a local radiator shop.

    Removed 2 ole (original?) MPI brand hoses (see pics) for the Webasto I believe and I replaced them with new 7/8″ id silicone. One was 8′ long and the other was 3.5′ long.

  • Jeff

    Member
    April 28, 2023 at 2:18 pm

    I got the CAC, radiator, gearbox, clutch fan area all cleaned and read to reinstall everything soon.

  • Archived

    Member
    April 28, 2023 at 5:57 pm

    Don:

    Why is the one section of the exhaust not covered by the heat blanket?

    Chuck

  • Clint

    Member
    April 28, 2023 at 6:22 pm

    The fan would hit it


    Clint & Tammy Summers
    2000 XL 45 Country Coach (rivets)
    1977 FC31 Bluebird Wanderlodge (more rivets)
    Vonore TN
  • Chuck & Katrina

    Member
    April 30, 2023 at 4:33 pm

    Replaced a couple more ole heater/coolant hoses that are located above the air dryer on my Liberty.

    Reinstalled atf/coolant heat exchanger and new atf lines.


    2000 Featherlite H3-45

    2024 Jeep Grand Cherokee

    Leesburg, FL
  • Archived

    Member
    April 30, 2023 at 5:22 pm

    Don:

    Your giving me engine bay envy.

    Chuck

  • Isaiah

    Member
    April 30, 2023 at 7:01 pm

    I love these updates.

  • Chuck & Katrina

    Member
    May 1, 2023 at 12:50 pm

    Don, can you provide source for fittings and hose.

    Also curious if you know where you can get a core for radiator. Few good radiator shops left in Denver. last one I used that has been around for many years was terrible.


    2000 Featherlite H3-45

    2024 Jeep Grand Cherokee

    Leesburg, FL
  • Jeff

    Member
    May 1, 2023 at 1:18 pm
    Which fitting and hose? I got the 2 atf lines and 2 water filter lines from Prevost. The rest of the hoses came from siliconehose.com after I got all the measurements.
    The radiator shop I dealt with here gives a core manufacturer? all the specs, they build it, and my local shop gets it puts it together. Takes about 5to7 working days. Cost with labor $3200
    or
    Prevost quoted me a price of $3300 for a core, they need 3 wks led time. Then a shop has to put it together.
    or
    Prevost quoted me $5200 for a complete radiator, they need 1 month led time. I’m not sure how much more labor is involved in this option?
  • Isaiah

    Member
    May 1, 2023 at 8:44 pm

    Gettin er done

  • Bill

    Member
    May 1, 2023 at 9:21 pm

    Darn that looks good.

    How much trans fluid did you lose replacing the trans lines?

    Chuck

  • Mike/Lisa

    Member
    May 1, 2023 at 10:25 pm

    2 gallons

    1 gallon initially, then maybe another gallon over the 7 days it sat and dripped without any lines on it.

  • DON

    Member
    May 2, 2023 at 7:55 am

    Don:

    If I read your post correctly, the trans lines were ordered/purchased from Prevost, so no big hoops to jump through there.

    I assume the gal or two of oil loss didn’t require special air purging. Would guess it cleared itself.

    Asking because those lines being replaced are on my bucket list.

    Chuck

  • john

    Member
    May 2, 2023 at 8:15 am

    Yes, atf lines came from Prevost.

    I have no plans for any special purging of the atf lines. The tranny has a positive displacement pump in it and it will force atf thru the lines.

    All coolant valves will be open to purge air.

  • Mike, 92 Country Coach

    Member
    May 2, 2023 at 12:18 pm

    I M P R E S S I V E work Don!

Page 2 of 3

Log in to reply.